About the EM specialty
Installs, maintains, and repairs electrical equipment on cutters and at shore units, including power generation and distribution, propulsion motors, machinery controls, and navigation equipment. Works with circuits, programmable logic controllers, and fiber optics, troubleshoots faults with test equipment, and at smaller units may lead the engineering department.
Transferable skills
- Electrical Systems
- Electronics
- Technical Troubleshooting
- Testing
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Drawings
- Technical Manuals
- Inspection
- Safety
- Supervision
Filter these jobs by location, pay, and more
29 jobs match EM Electrician’s Mate
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Facilities Maintenance Technician
C&L Aviation Group · Bangor, ME
Strong Match
Facilities maintenance technician at the C&L Aviation hangar complex in Bangor, Maine. Keeps buildings, grounds, generators, and diesel vehicles and equipment running, diagnosing engines, pumps, motors, and hydraulics from manuals and wiring diagrams, handling light plumbing, electrical, carpentry, and HVAC work, answering urgent repair calls, and logging work orders. Pays $22 to $28 an hour.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 8 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Manuals
- Inspection
- Safety
View Job
On careers.cla.aero · Added Sep 29
-
Maintenance Technician
LMI Aerospace · Fredonia, KS
Strong Match
Maintenance technician at Sonaca North America (formerly LMI Aerospace) in Fredonia, Kansas. Installs, repairs, and maintains production machinery, forklifts, and power tools, handles plant electrical, plumbing, and HVAC work, performs routine inspections and preventive maintenance, and documents repairs. High school diploma preferred (otherwise an assessment); HVAC, journeyman electrician, or boiler licenses and National Electrical Code knowledge are pluses.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Manuals
- Safety
View Job
On sonaca.wd103.myworkdayjobs.com · Added Sep 25
-
Maintenance Technician
NMG Aerospace · Tempe, AZ
Strong Match
Maintenance technician at NMG Aerospace in Tempe, Arizona, keeping CNC machining centers and plant equipment running. Finds and fixes electrical, mechanical, hydraulic, and pneumatic faults, rebuilds and aligns specialized machinery, carries out preventive maintenance and logs repairs, sources replacement parts, and helps with installations and facility projects. Three to five years repairing CNC or industrial equipment.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Drawings
- Safety
View Job
On recruiting.ultipro.com · Added Oct 1
-
Industrial Maintenance Technician
Héroux-Devtek · Springfield, OH
Strong Match
Industrial maintenance technician at Héroux-Devtek's landing gear plant in Springfield, Ohio. Installs, repairs, and services CNC lathes, mill-turns, and multi-axis mills, fixing mechanical, electrical, hydraulic, and pneumatic faults during breakdowns and scheduled downtime, plus preventive and facility maintenance. Needs four years of manufacturing experience, a high school diploma, and a craft apprenticeship or equivalent.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Manuals
- Safety
View Job
On recruiting.ultipro.ca · Added Sep 25
-
Maintenance Technician
Essex Industries · St. Louis, MO
Strong Match
Plant maintenance technician at Essex Industries in St. Louis, a maker of aircraft controls and oxygen equipment. Keeps production machines and buildings running: troubleshoots motors, VFDs, and control circuits, repairs hydraulic, pneumatic, and mechanical equipment, and does preventive maintenance, light welding, and safety inspections. Needs two years of technical school plus two to five years of industrial maintenance, or equivalent.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Drawings
- Safety
- Associate degree or equivalent experience
- Requires: EPA refrigerant (CFC) certification for HVAC work
View Job
On essexind.rec.pro.ukg.net · Added Sep 25
-
Maintenance Technician
GKN Aerospace · El Cajon, CA
Strong Match
Maintenance technician at GKN Aerospace's El Cajon, California plant. Keeps CNC machines, robots, furnaces, chemical lines, and utilities running: troubleshoots 480-volt controls, drives, and PLCs, repairs hydraulic, pneumatic, and drivetrain parts, finds root causes, and logs work in the CMMS. Needs four years of industrial maintenance; pyrometry and aerospace equipment experience preferred. Pay $32 to $40 an hour.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Drawings
- Safety
View Job
On joinus.gknaerospace.com · Added Sep 25
-
GSE and Facilities Support Technician
Cutter Aviation · Phoenix, AZ
Strong Match
Ground equipment and facilities technician at the Cutter Aviation Phoenix FBO. Services and repairs tugs, power units, fuel trucks, and other line equipment, inspects buildings, lighting, gates, and pavement, keeps maintenance records, handles hazardous waste and OSHA compliance, schedules contractors, and backs up fueling and towing. Needs two years of heavy mechanical work and a driver license.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Inspection
- Safety
View Job
On cutteraviation.com · Added Sep 29
-
CNC Maintenance Technician
Primus Aerospace · Lakewood, CO
Good Match
CNC maintenance technician at Primus Aerospace's Lakewood, Colorado machining plant. Keeps lathes, mills, and grinders running with preventive maintenance and repairs of mechanical, electrical, hydraulic, and pneumatic faults, installs and calibrates machines, manages spare parts, and trains operators. Needs one to five years of CNC maintenance, 480V, VFD, and PLC experience, and U.S. citizenship.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Technical Manuals
- Safety
View Job
On primusaero.bamboohr.com · Added Sep 25
-
Electromechanical Overhaul Technician
Duncan Aviation · Lincoln, NE
Good Match
Electromechanical overhaul technician in Duncan Aviation's Lincoln, Nebraska component shop. Tests, troubleshoots, repairs, and overhauls aircraft accessory components to manufacturer specs, orders the parts each job needs, keeps work orders and FAA-required records current, and supplies repair details for estimates. Hired at levels I to III by experience; associate degree preferred.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and testing.
Shares 6 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Testing
- Equipment Maintenance
- Mechanical Systems
- Technical Manuals
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Maintenance Supervisor
Essex Industries · St. Louis, MO
Good Match
Maintenance supervisor for three Essex Industries plants in St. Louis. Leads technicians maintaining production equipment, boilers, HVAC, and buildings, shifts the team toward preventive maintenance, tracks downtime and backlog, keeps equipment records and PM schedules, orders parts, runs the safety committee and investigates accidents. Needs technical college and two to five years of industrial maintenance; CFC certification for HVAC work.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 7 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
- Safety
- Supervision
- Requires: EPA CFC refrigerant certification (for HVAC work)
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Aircraft Electrician
Tyonek Global Services · Robins AFB, GA
Good Match
Aircraft electrician at Robins AFB supporting C-5, C-17, C-130, F-15, and other workloads. Troubleshoots, calibrates, and repairs power distribution, lighting, and fuel indicating systems, and tests circuits with automated equipment and schematics. Needs two years of recent experience and a Secret clearance within nine months.
Why this matched
Your experience maps to electrical systems, electronics, and technical troubleshooting.
Shares 6 of your 12 skills:
- Electrical Systems
- Electronics
- Technical Troubleshooting
- Testing
- Technical Drawings
- Technical Manuals
View Job
On tyonekjobs.applicantpro.com · Added Aug 28
-
CNC Maintenance Technician
Air Industries Group · Barkhamsted, CT
Good Match
Machine maintenance technician at Sterling Engineering, an Air Industries Group plant in Barkhamsted, Connecticut that machines flight-critical aerospace parts. Troubleshoots, repairs, and maintains the shop's CNC mills and lathes, equipment, and instrumentation, using strong mechanical and electrical skills. Needs five years of CNC machine maintenance, aerospace strongly preferred, and U.S. citizenship or permanent residency.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment maintenance.
Shares 5 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Maintenance
- Preventative Maintenance
- Mechanical Systems
View Job
On airindustriesgroup.com · Added Sep 25
-
Avionics Technician
Cutter Aviation · Broomfield, CO
Good Match
Avionics technician in Cutter Aviation's Broomfield, CO repair station. Installs, repairs, troubleshoots, and modifies avionics and airframe electrical systems on business aircraft, performs operational checks, and documents every discrepancy to Part 145 standards. Needs two or more years of avionics installation and repair experience; A&P preferred, FCC license optional, high school diploma required.
Why this matched
Your experience maps to electrical systems, electronics, and testing.
Shares 6 of your 12 skills:
- Electrical Systems
- Electronics
- Testing
- Technical Drawings
- Technical Manuals
- Safety
View Job
On cutteraviation.com · Added Sep 25
-
Egress Systems Technician
Vertex Aerospace · Meridian, MS
Good Match
T-45 egress and life support technician at NAS Meridian. Removes, inspects, and reinstalls ejection seats and canopy explosives, maintains oxygen and environmental systems, and supports flight line operations. Requires three years of ejection seat maintenance and a military or factory seat course.
Why this matched
Your experience maps to technical troubleshooting, preventative maintenance, and mechanical systems.
Shares 6 of your 12 skills:
- Technical Troubleshooting
- Preventative Maintenance
- Mechanical Systems
- Technical Manuals
- Inspection
- Safety
-
Aircraft Maintenance Technician
Cutter Aviation · Broomfield, CO
Good Match
Airframe and powerplant technician at Cutter Aviation's Rocky Mountain Metropolitan Airport shop working on Pilatus PC-12 and PC-24 aircraft. Handles scheduled maintenance, major inspections, troubleshooting, component changes, engine runs, and modifications under Part 145 repair station procedures. Requires an A&P certificate and two years of business aircraft maintenance experience.
Why this matched
Your experience maps to testing, preventative maintenance, and mechanical systems.
Shares 6 of your 12 skills:
- Testing
- Preventative Maintenance
- Mechanical Systems
- Technical Drawings
- Technical Manuals
- Safety
- FAA A&P certificate required
View Job
On cutteraviation.com · Added Sep 25
-
Electronic Test Technician
Lockheed Martin · Moorestown, NJ
Good Match
Production electronic test technician setting up test equipment and automated test systems, testing first-piece and production hardware from test methods, schematics, and specification drawings, isolating faults, and keeping test records.
Why this matched
Your experience maps to electronics, technical troubleshooting, and testing.
Shares 5 of your 12 skills:
- Electronics
- Technical Troubleshooting
- Testing
- Technical Drawings
- Technical Manuals
- Requires: Electronic technology certificate or degree
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
Electronic Calibration Technician
Moog · Torrance, CA
Potential Match
Electronic calibration technician in the metrology lab of Moog's Military Aircraft Group in Torrance, California, which builds flight control actuators for aircraft such as the F-35. Calibrates and repairs electronic, hydraulic, and servo test stands and measuring equipment from procedures and military specs, and isolates faults to the component. Five years of calibration; $30 to $45 an hour.
Why this matched
Your experience maps to electronics, technical troubleshooting, and testing.
Shares 5 of your 12 skills:
- Electronics
- Technical Troubleshooting
- Testing
- Equipment Maintenance
- Technical Drawings
View Job
On moog.wd5.myworkdayjobs.com · Added Oct 1
-
Avionics Technician
Duncan Aviation · Fort Lauderdale, FL
Potential Match
Avionics technician at Duncan Aviation's Fort Lauderdale line station, hired at three levels. Tests, troubleshoots, repairs, and replaces avionics and instrument systems, may act as a qualified inspector, and trains less experienced staff. Associate degree or equivalent and Repairman Certificate eligibility required.
Why this matched
Your experience maps to electrical systems, electronics, and technical troubleshooting.
Shares 5 of your 12 skills:
- Electrical Systems
- Electronics
- Technical Troubleshooting
- Testing
- Inspection
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Avionics Engineering Support
Leidos · Bedford, MA
Potential Match
Engineering support for airborne SATCOM and avionics integration on defense aircraft in Bedford, MA. Integrates terminals, antennas, and aircraft networks, troubleshoots problems, writes installation and test documentation, and supports ground and flight tests. Bachelor's plus four years; Secret clearance eligibility.
Why this matched
Your experience maps to electrical systems, electronics, and technical troubleshooting.
Shares 5 of your 12 skills:
- Electrical Systems
- Electronics
- Technical Troubleshooting
- Testing
- Technical Drawings
- Bachelor's degree required
View Job
On careers.leidos.com · Added Aug 28
-
Avionics Technician
Banyan Air Service · Fort Lauderdale, FL
Potential Match
Senior avionics technician at Banyan Air Service in Fort Lauderdale. Diagnoses and repairs communication, navigation, radar, transponder, audio, and autopilot equipment down to the component level, on the bench and in business jets, then records the work and keeps test-equipment calibration current. Needs three years of related experience plus avionics factory training; A&P is a plus.
Why this matched
Your experience maps to electrical systems, electronics, and technical troubleshooting.
Shares 5 of your 12 skills:
- Electrical Systems
- Electronics
- Technical Troubleshooting
- Testing
- Technical Manuals
- Requires: Avionics factory certification
View Job
On banyanair.acquiretm.com · Added Sep 25
-
Precision Assembler
Essex Industries · Milford, CT
Potential Match
Precision assembler at Essex Industries in Milford, Connecticut. Builds complex aerospace components from blueprints, work instructions, and acceptance test procedures, sets up fixtures and test gear, runs mechanical tests and records data, diagnoses faults and repairs units under FAA and quality rules, and inspects supplier parts. Needs three to five years of mechanical assembly or technician work; vocational training preferred.
Why this matched
Your experience maps to technical troubleshooting, testing, and mechanical systems.
Shares 5 of your 12 skills:
- Technical Troubleshooting
- Testing
- Mechanical Systems
- Technical Drawings
- Inspection
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Avionics Technician
Lockheed Martin · Valparaiso, FL
Potential Match
Avionics and electrical technician on F-35 depot modification work at Eglin AFB. Overhauls and repairs aircraft wiring and electrical systems, traces faults with advanced test equipment, installs engineering changes, and works from drawings and manuals. Needs 3-5 years of fighter experience with a military rating or FAA A&P; Secret clearance.
Why this matched
Your experience maps to electrical systems, electronics, and testing.
Shares 5 of your 12 skills:
- Electrical Systems
- Electronics
- Testing
- Technical Drawings
- Technical Manuals
View Job
On lockheedmartin.eightfold.ai · Added Aug 25
-
Production Supervisor, Grinding
Héroux-Devtek · Livonia, MI
Potential Match
Second-shift production supervisor for the grinding department at Beaver Aerospace & Defense in Livonia, Michigan. Leads machinists doing precision ID/OD, centerless, and thread grinding, schedules the work, reads drawings and sets methods and tooling, fixes grinder problems, checks parts with gauges and CMM, and coaches staff. Needs five years each of grinding and supervision. Pays $85,000 a year.
Why this matched
Your experience maps to equipment maintenance, technical drawings, and inspection.
Shares 5 of your 12 skills:
- Equipment Maintenance
- Technical Drawings
- Inspection
- Safety
- Supervision
View Job
On recruiting.ultipro.ca · Added Sep 29
-
Aircraft Maintenance Technician
Empire Airlines · Great Falls, MT
Potential Match
Line A&P mechanic for Empire Airlines at its Great Falls, Montana station. Inspects and repairs airframes, engines, and hydraulic, electrical, and structural systems, troubleshoots pilot write-ups, changes engines, and logs all work to FAA and program standards, with up to 25% field travel. Requires an A&P certificate and high school diploma.
Why this matched
Your experience maps to electrical systems, preventative maintenance, and technical drawings.
Shares 5 of your 12 skills:
- Electrical Systems
- Preventative Maintenance
- Technical Drawings
- Technical Manuals
- Safety
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Sep 25
-
Avionics Technician
Empire Airlines · Spokane, WA
Potential Match
Avionics technician on Empire Airlines' Spokane, Washington line crew. Repairs avionics components, helps with airframe and engine maintenance on scheduled and unscheduled checks, and assists with pushbacks, aircraft moves, and nightly washes; nights and weekends possible. High school diploma required; A&P (or ready to test) and two years of avionics experience preferred.
Why this matched
Your experience maps to electrical systems, electronics, and preventative maintenance.
Shares 4 of your 12 skills:
- Electrical Systems
- Electronics
- Preventative Maintenance
- Safety
View Job
On recruiting.paylocity.com · Added Sep 25
-
Oxygen Systems Technician
Airborne Systems · NJ
Potential Match
Entry-level oxygen systems technician at Airborne Systems in New Jersey, maker of parachutes and aircrew oxygen equipment. Cleans and inspects parts in a clean room, measures them with calipers and optical tools against blueprints, assembles and pressure-tests hoses and subassemblies, and packages parts. High school diploma; up to three years of inspection or assembly experience. $20 to $28 an hour.
Why this matched
Your experience maps to testing, technical drawings, and inspection.
Shares 4 of your 12 skills:
- Testing
- Technical Drawings
- Inspection
- Safety
View Job
On airborne-sys.com · Added Sep 25
-
Precision Grinder
Héroux-Devtek · Livonia, MI
Potential Match
Precision grinder at Beaver Aerospace & Defense in Livonia, Michigan. Sets up grinding machines from blueprints, picks and mounts wheels, grinds inside and outside diameters and faces to tolerances as tight as fifty millionths of an inch, checks parts with micrometers and gauges, adjusts or stops machines when problems appear, and does routine upkeep. Pays $27.16 an hour.
Why this matched
Your experience maps to technical troubleshooting, equipment maintenance, and technical drawings.
Shares 4 of your 12 skills:
- Technical Troubleshooting
- Equipment Maintenance
- Technical Drawings
- Inspection
View Job
On recruiting.ultipro.ca · Added Sep 29
-
Production Machinist
LMI Aerospace · Fredonia, KS
Potential Match
Production machinist at Sonaca North America in Fredonia, Kansas. Loads and cycles CNC machining centers and manual machines, watches for worn or broken cutting tools, checks parts against blueprint dimensions with calipers and micrometers, deburrs finished parts, keeps fluids topped and chips cleared, and fills out production paperwork. Entry path: high school diploma or assessment; machining trade school preferred.
Why this matched
Your experience maps to equipment maintenance, technical drawings, and inspection.
Shares 4 of your 12 skills:
- Equipment Maintenance
- Technical Drawings
- Inspection
- Safety
View Job
On sonaca.wd103.myworkdayjobs.com · Added Sep 29
-
Circuit Card Repair Technician
Innovative Solutions & Support · Exton, PA
Potential Match
Circuit card repair technician at Innovative Aerosystems, the avionics maker formerly known as IS&S, in Exton, Pennsylvania. Finds faults on printed circuit boards with oscilloscopes, meters, and logic analyzers, replaces chips and other parts, solders surface-mount and through-hole components, reworks boards to engineering specs, runs functional tests, and logs repairs and recurring failures. Electronics degree, technical certificate, or military training.
Why this matched
Your experience maps to electronics, technical troubleshooting, and testing.
Shares 4 of your 12 skills:
- Electronics
- Technical Troubleshooting
- Testing
- Technical Drawings
View Job
On recruiting.paylocity.com · Added Sep 29