About the 3E0X1 AFSC
Installs, maintains, troubleshoots, and repairs electrical distribution systems above and below 600 volts, airfield lighting, and fire alarms. Works on overhead and underground lines, transformers, switches, breakers, and fixtures, climbs poles, operates line and high-reach trucks, inspects poles and cables, and tests manholes for dangerous gases.
Transferable skills
- Electrical Systems
- Construction
- Technical Troubleshooting
- Safety
- Regulatory Compliance
- Equipment Operation
Filter these jobs by location, pay, and more
11 jobs match 3E0X1 Electrical Systems
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Maintenance Technician
LMI Aerospace · Fredonia, KS
Good Match
Maintenance technician at Sonaca North America (formerly LMI Aerospace) in Fredonia, Kansas. Installs, repairs, and maintains production machinery, forklifts, and power tools, handles plant electrical, plumbing, and HVAC work, performs routine inspections and preventive maintenance, and documents repairs. High school diploma preferred (otherwise an assessment); HVAC, journeyman electrician, or boiler licenses and National Electrical Code knowledge are pluses.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and equipment operation.
Shares 4 of your 6 skills:
- Electrical Systems
- Technical Troubleshooting
- Equipment Operation
- Safety
View Job
On sonaca.wd103.myworkdayjobs.com · Added Sep 25
-
GSE and Facilities Support Technician
Cutter Aviation · Phoenix, AZ
Potential Match
Ground equipment and facilities technician at the Cutter Aviation Phoenix FBO. Services and repairs tugs, power units, fuel trucks, and other line equipment, inspects buildings, lighting, gates, and pavement, keeps maintenance records, handles hazardous waste and OSHA compliance, schedules contractors, and backs up fueling and towing. Needs two years of heavy mechanical work and a driver license.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 4 of your 6 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Regulatory Compliance
View Job
On cutteraviation.com · Added Sep 29
-
Aircraft Maintenance Technician
C&L Aviation Group · Bangor, ME
Potential Match
A&P mechanic at C&L Aviation Services in Bangor, Maine, doing heavy maintenance and modification work on regional and corporate aircraft. Inspects, repairs, and troubleshoots structures, mechanical systems, and electronics as part of a hangar team. Requires an FAA A&P certificate and troubleshooting experience; Challenger, ERJ, Dash 8, or Saab 340 time is a plus.
Why this matched
Your experience maps to electrical systems, safety, and regulatory compliance.
Shares 3 of your 6 skills:
- Electrical Systems
- Safety
- Regulatory Compliance
- FAA A&P certificate required
View Job
On careers.cla.aero · Added Sep 25
-
Avionics Technician
Empire Airlines · Spokane, WA
Potential Match
Avionics technician on Empire Airlines' Spokane, Washington line crew. Repairs avionics components, helps with airframe and engine maintenance on scheduled and unscheduled checks, and assists with pushbacks, aircraft moves, and nightly washes; nights and weekends possible. High school diploma required; A&P (or ready to test) and two years of avionics experience preferred.
Why this matched
Your experience maps to electrical systems, equipment operation, and safety.
Shares 3 of your 6 skills:
- Electrical Systems
- Equipment Operation
- Safety
View Job
On recruiting.paylocity.com · Added Sep 25
-
CNC Machinist
Héroux-Devtek · Springfield, OH
Potential Match
CNC machinist at the Héroux-Devtek plant in Springfield, Ohio, which machines large landing gear and titanium parts for aircraft such as the F-35, C-130, and Boeing 777. Sets up and runs CNC lathes, mills, and boring mills on Fanuc, Mazak, and Okuma controls, sets offsets, proves new programs, troubleshoots, and handles preventive maintenance and safety checks.
Why this matched
Your experience maps to technical troubleshooting, equipment operation, and safety.
Shares 3 of your 6 skills:
- Technical Troubleshooting
- Equipment Operation
- Safety
View Job
On recruiting.ultipro.ca · Added Sep 29
-
Associate Logistics Technician
Moog · Orrville, OH
Potential Match
Associate logistics technician at Moog's Space and Defense plant in Orrville, Ohio, on first shift. Receives incoming material, packs and labels outgoing products to contract requirements, books truck pickups, keeps material traceable to vendor paperwork, drives parts to outside processors, runs forklifts and cranes, and helps in the stockroom. One year of manufacturing experience; $18 to $24 an hour.
Why this matched
Your experience maps to equipment operation, safety, and regulatory compliance.
Shares 3 of your 6 skills:
- Equipment Operation
- Safety
- Regulatory Compliance
View Job
On moog.wd5.myworkdayjobs.com · Added Oct 1
-
Line Service Technician
Cutter Aviation · Georgetown, TX
Potential Match
Line service technician at the Cutter Aviation FBO in Georgetown, Texas. Fuels business aircraft from refueling trucks, tows and parks planes in and out of hangars, services aircraft systems, loads baggage, drives crews and passengers around the airfield and to hotels, follows FAA and TSA ramp rules, and logs services on work tickets. FBO experience preferred; $19 an hour.
Why this matched
Your experience maps to equipment operation, safety, and regulatory compliance.
Shares 3 of your 6 skills:
- Equipment Operation
- Safety
- Regulatory Compliance
- Requires: Valid driver license
View Job
On cutteraviation.com · Added Oct 1
-
Line Service Technician
Hill Aircraft · Atlanta, GA
Potential Match
Entry-level ramp technician at the Hill Aircraft FBO in Atlanta. Marshals, tows, and fuels business aircraft, runs daily fuel quality checks and fuel farm records, operates tugs, forklifts, and refuelers, and provides ground power, lavatory, and baggage service. Needs two years of customer service experience and a high school diploma; aviation experience preferred.
Why this matched
Your experience maps to equipment operation, safety, and regulatory compliance.
Shares 3 of your 6 skills:
- Equipment Operation
- Safety
- Regulatory Compliance
View Job
On hillaircraft.isolvedhire.com · Added Sep 25
-
Electronics Test Technician
Innovative Solutions & Support · Exton, PA
Potential Match
Day-shift electronics test technician at Innovative Aerosystems' Part 145 repair station in Exton, Pennsylvania. Calibrates, tests, and repairs avionics displays and instruments down to the component level, runs acceptance tests, and works with engineers on hard faults using scopes and meters. Needs an electronics associate degree or equivalent, five years of electronics repair, and SMT and through-hole soldering skills.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and regulatory compliance.
Shares 3 of your 6 skills:
- Electrical Systems
- Technical Troubleshooting
- Regulatory Compliance
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Sep 25
-
Electromechanical Overhaul Technician
Duncan Aviation · Lincoln, NE
Potential Match
Electromechanical overhaul technician in Duncan Aviation's Lincoln, Nebraska component shop. Tests, troubleshoots, repairs, and overhauls aircraft accessory components to manufacturer specs, orders the parts each job needs, keeps work orders and FAA-required records current, and supplies repair details for estimates. Hired at levels I to III by experience; associate degree preferred.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and regulatory compliance.
Shares 3 of your 6 skills:
- Electrical Systems
- Technical Troubleshooting
- Regulatory Compliance
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Maintenance Technician
NMG Aerospace · Tempe, AZ
Potential Match
Maintenance technician at NMG Aerospace in Tempe, Arizona, keeping CNC machining centers and plant equipment running. Finds and fixes electrical, mechanical, hydraulic, and pneumatic faults, rebuilds and aligns specialized machinery, carries out preventive maintenance and logs repairs, sources replacement parts, and helps with installations and facility projects. Three to five years repairing CNC or industrial equipment.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 3 of your 6 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
View Job
On recruiting.ultipro.com · Added Oct 1