About the 2P0X1 AFSC
Repairs, calibrates, and modifies test, measurement, and diagnostic equipment, including laboratory standards and automatic test equipment. Measures voltage, current, power, impedance, frequency, microwave, temperature, dimensional, and optical values, isolates faults to the component level using schematics and software diagnostics, certifies traceability to reference standards, records maintenance data, and disposes of hazardous waste properly.
Transferable skills
- Calibration
- Electronics
- Testing
- Technical Troubleshooting
- Quality Control
- Technical Drawings
- Maintenance Documentation
- Hazardous Materials
Filter these jobs by location, pay, and more
19 jobs match 2P0X1 Precision Measurement Equipment Laboratory
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Circuit Card Repair Technician
Innovative Solutions & Support · Exton, PA
Strong Match
Circuit card repair technician at Innovative Aerosystems, the avionics maker formerly known as IS&S, in Exton, Pennsylvania. Finds faults on printed circuit boards with oscilloscopes, meters, and logic analyzers, replaces chips and other parts, solders surface-mount and through-hole components, reworks boards to engineering specs, runs functional tests, and logs repairs and recurring failures. Electronics degree, technical certificate, or military training.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 5 of your 8 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Technical Drawings
- Quality Control
View Job
On recruiting.paylocity.com · Added Sep 29
-
Electronics Test Technician (3rd Shift)
Innovative Solutions & Support · Exton, PA
Strong Match
Third-shift electronics test technician at Innovative Aerosystems, the avionics maker in Exton, Pennsylvania. Calibrates, tests, and repairs customer avionics and instrument assemblies to the component level under FAA Part 145 repair station rules, runs acceptance tests, troubleshoots video, Ethernet, and display circuits, solders surface-mount parts, and documents results. Associate degree or equivalent plus five years.
Why this matched
Your experience maps to calibration, electronics, and testing.
Shares 5 of your 8 skills:
- Calibration
- Electronics
- Testing
- Technical Troubleshooting
- Quality Control
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Oct 1
-
Electronics Test Technician
Innovative Solutions & Support · Exton, PA
Good Match
Day-shift electronics test technician at Innovative Aerosystems' Part 145 repair station in Exton, Pennsylvania. Calibrates, tests, and repairs avionics displays and instruments down to the component level, runs acceptance tests, and works with engineers on hard faults using scopes and meters. Needs an electronics associate degree or equivalent, five years of electronics repair, and SMT and through-hole soldering skills.
Why this matched
Your experience maps to calibration, electronics, and testing.
Shares 5 of your 8 skills:
- Calibration
- Electronics
- Testing
- Technical Troubleshooting
- Quality Control
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Sep 25
-
Electronic Calibration Technician
Moog · Torrance, CA
Good Match
Electronic calibration technician in the metrology lab of Moog's Military Aircraft Group in Torrance, California, which builds flight control actuators for aircraft such as the F-35. Calibrates and repairs electronic, hydraulic, and servo test stands and measuring equipment from procedures and military specs, and isolates faults to the component. Five years of calibration; $30 to $45 an hour.
Why this matched
Your experience maps to calibration, electronics, and testing.
Shares 5 of your 8 skills:
- Calibration
- Electronics
- Testing
- Technical Troubleshooting
- Technical Drawings
View Job
On moog.wd5.myworkdayjobs.com · Added Oct 1
-
Aircraft Electrician
Tyonek Global Services · Robins AFB, GA
Good Match
Aircraft electrician at Robins AFB supporting C-5, C-17, C-130, F-15, and other workloads. Troubleshoots, calibrates, and repairs power distribution, lighting, and fuel indicating systems, and tests circuits with automated equipment and schematics. Needs two years of recent experience and a Secret clearance within nine months.
Why this matched
Your experience maps to calibration, electronics, and testing.
Shares 5 of your 8 skills:
- Calibration
- Electronics
- Testing
- Technical Troubleshooting
- Technical Drawings
View Job
On tyonekjobs.applicantpro.com · Added Aug 28
-
Avionics Technician
Banyan Air Service · Fort Lauderdale, FL
Good Match
Senior avionics technician at Banyan Air Service in Fort Lauderdale. Diagnoses and repairs communication, navigation, radar, transponder, audio, and autopilot equipment down to the component level, on the bench and in business jets, then records the work and keeps test-equipment calibration current. Needs three years of related experience plus avionics factory training; A&P is a plus.
Why this matched
Your experience maps to calibration, electronics, and testing.
Shares 5 of your 8 skills:
- Calibration
- Electronics
- Testing
- Technical Troubleshooting
- Maintenance Documentation
- Requires: Avionics factory certification
View Job
On banyanair.acquiretm.com · Added Sep 25
-
Electronic Test Technician
Lockheed Martin · Moorestown, NJ
Good Match
Production electronic test technician setting up test equipment and automated test systems, testing first-piece and production hardware from test methods, schematics, and specification drawings, isolating faults, and keeping test records.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 4 of your 8 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Technical Drawings
- Requires: Electronic technology certificate or degree
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
Assembly and Test Technician
Moog · Buffalo, NY
Potential Match
Assembly and test technician building hydraulic, pneumatic, and electromechanical valves and actuators for military aircraft, performing high-reliability soldering and crimping, working from drawings, and testing and reworking units.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 4 of your 8 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Technical Drawings
View Job
On moog.wd5.myworkdayjobs.com · Added Sep 24
-
NDT Technician
C&L Aviation Group · Bangor, ME
Potential Match
Nondestructive testing technician at C&L Aviation's Bangor, Maine MRO. Inspects aircraft and parts for cracks and flaws with eddy current, magnetic particle, ultrasonic, and penetrant methods, prepares parts, calibrates and maintains NDT equipment, and completes inspection records. Requires ASNT Level II in those methods, five years of NDT work, and an A&P; NAS 410 and radiography preferred.
Why this matched
Your experience maps to calibration, testing, and quality control.
Shares 4 of your 8 skills:
- Calibration
- Testing
- Quality Control
- Maintenance Documentation
- FAA A&P certificate required
- Requires: ASNT NDT Level II (ET, MT, UT, PT)
View Job
On careers.cla.aero · Added Sep 25
-
Quality Inspector
Innovative Solutions & Support · Exton, PA
Potential Match
Quality inspector for Innovative Aerosystems (formerly IS&S), an avionics maker in Exton, Pennsylvania. Inspects incoming material, work in process, and finished electronic and mechanical assemblies against IPC workmanship standards, keeps calibration and quality records, and verifies documentation at final inspection. Needs five years in manufacturing, drawing-reading skills, and knowledge of AS9100 and J-STD-001; U.S. person status required.
Why this matched
Your experience maps to calibration, electronics, and technical drawings.
Shares 4 of your 8 skills:
- Calibration
- Electronics
- Technical Drawings
- Quality Control
View Job
On recruiting.paylocity.com · Added Sep 25
-
CMM Programmer
Piper Aircraft · Vero Beach, FL
Potential Match
CMM programmer at Piper Aircraft in Vero Beach, Florida, hired at regular or senior level. Writes, proves, and tunes coordinate measuring machine programs in PC-DMIS or similar, sets fixtures and probes, reads drawings and GD&T to set inspection criteria, runs AS9102 first article inspections, and joins material review work. Two years of CMM inspection for regular, five for senior.
Why this matched
Your experience maps to calibration, testing, and technical drawings.
Shares 4 of your 8 skills:
- Calibration
- Testing
- Technical Drawings
- Quality Control
View Job
On irecruit-us.com · Added Oct 1
-
Calibration Technician
Lockheed Martin · Orlando, FL
Potential Match
Tool calibration technician calibrating mechanical and precision measuring tools to specifications and engineering drawings, setting up precision measurement equipment, and accepting or rejecting items for dimensional conformity.
Why this matched
Your experience maps to calibration, technical drawings, and quality control.
Shares 3 of your 8 skills:
- Calibration
- Technical Drawings
- Quality Control
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
Avionics Technician
Duncan Aviation · Fort Lauderdale, FL
Potential Match
Avionics technician at Duncan Aviation's Fort Lauderdale line station, hired at three levels. Tests, troubleshoots, repairs, and replaces avionics and instrument systems, may act as a qualified inspector, and trains less experienced staff. Associate degree or equivalent and Repairman Certificate eligibility required.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 4 of your 8 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Maintenance Documentation
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Assembly and Test Technician
Triumph Group · Clemmons, NC
Potential Match
Hydraulic assembly and test technician at Triumph's actuation systems plant in Clemmons, North Carolina. Builds, acceptance-tests, troubleshoots, repairs, and finishes hydraulic components from engineering drawings and specs, records assembly and test data, and trains others on precision measuring tools. Needs a high school diploma and two years of military, aviation maintenance, or manufacturing experience; A&P preferred.
Why this matched
Your experience maps to testing, technical troubleshooting, and technical drawings.
Shares 4 of your 8 skills:
- Testing
- Technical Troubleshooting
- Technical Drawings
- Maintenance Documentation
View Job
On careers.triumphgroup.com · Added Sep 25
-
Precision Assembler
Essex Industries · Milford, CT
Potential Match
Precision assembler at Essex Industries in Milford, Connecticut. Builds complex aerospace components from blueprints, work instructions, and acceptance test procedures, sets up fixtures and test gear, runs mechanical tests and records data, diagnoses faults and repairs units under FAA and quality rules, and inspects supplier parts. Needs three to five years of mechanical assembly or technician work; vocational training preferred.
Why this matched
Your experience maps to testing, technical troubleshooting, and technical drawings.
Shares 4 of your 8 skills:
- Testing
- Technical Troubleshooting
- Technical Drawings
- Quality Control
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Avionics Engineering Support
Leidos · Bedford, MA
Potential Match
Engineering support for airborne SATCOM and avionics integration on defense aircraft in Bedford, MA. Integrates terminals, antennas, and aircraft networks, troubleshoots problems, writes installation and test documentation, and supports ground and flight tests. Bachelor's plus four years; Secret clearance eligibility.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 4 of your 8 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Technical Drawings
- Bachelor's degree required
View Job
On careers.leidos.com · Added Aug 28
-
Avionics Technician
Cutter Aviation · Broomfield, CO
Potential Match
Avionics technician in Cutter Aviation's Broomfield, CO repair station. Installs, repairs, troubleshoots, and modifies avionics and airframe electrical systems on business aircraft, performs operational checks, and documents every discrepancy to Part 145 standards. Needs two or more years of avionics installation and repair experience; A&P preferred, FCC license optional, high school diploma required.
Why this matched
Your experience maps to electronics, testing, and technical drawings.
Shares 4 of your 8 skills:
- Electronics
- Testing
- Technical Drawings
- Maintenance Documentation
View Job
On cutteraviation.com · Added Sep 25
-
Structures Inspector
Piper Aircraft · Vero Beach, FL
Potential Match
Structures inspector at Piper Aircraft in Vero Beach, Florida, level I or II. Inspects detail parts, assemblies, and aircraft systems against drawings, specs, and FAA rules, checks travelers and records, performs first-article and conformity inspections, and writes up nonconforming material. High school diploma required; level I needs some manufacturing or inspection time, level II three to five years.
Why this matched
Your experience maps to calibration, testing, and technical drawings.
Shares 4 of your 8 skills:
- Calibration
- Testing
- Technical Drawings
- Quality Control
View Job
On irecruit-us.com · Added Sep 25
-
Quality Inspector (3rd Shift)
NMG Aerospace · Stow, OH
Potential Match
Third-shift quality inspector at NMG Aerospace in Stow, Ohio, working 11 pm to 7 am Sunday through Thursday. Inspects machined aerospace parts in process and at final against prints, GD&T, and military and industry specs, runs the CMM and contour tracer, completes first article inspections and FAA 8130 paperwork, and handles discrepant material reports. Three years of machining inspection.
Why this matched
Your experience maps to testing, technical drawings, and quality control.
Shares 3 of your 8 skills:
- Testing
- Technical Drawings
- Quality Control
View Job
On recruiting.ultipro.com · Added Oct 1