About the 15X20 specialty
Performs and troubleshoots maintenance on AH-64 attack helicopter armament, electrical, and avionics subsystems, including weapons and missile launchers, fire control components, electrical power systems, wiring harnesses, and cockpit instruments. Isolates faults using schematics, wiring diagrams, and test sets, repairs and replaces components and wiring, performs boresighting and operational checks, enforces weapons and explosive safety procedures, trains junior repairers, and completes aircraft maintenance forms and records. Skill level 20.
Transferable skills
- Electrical Systems
- Electronics
- Avionics
- Aircraft Maintenance
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Technical Manuals
- Training
- Technical Drawings
Filter these jobs by location, pay, and more
40 jobs match 15X20 AH-64 Armament/Electrical Systems, Skill Level 20
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Avionics Technician
Cutter Aviation · Broomfield, CO
Strong Match
Avionics technician in Cutter Aviation's Broomfield, CO repair station. Installs, repairs, troubleshoots, and modifies avionics and airframe electrical systems on business aircraft, performs operational checks, and documents every discrepancy to Part 145 standards. Needs two or more years of avionics installation and repair experience; A&P preferred, FCC license optional, high school diploma required.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 8 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- Technical Drawings
View Job
On cutteraviation.com · Added Sep 25
-
Avionics Technician
Duncan Aviation · Fort Lauderdale, FL
Strong Match
Avionics technician at Duncan Aviation's Fort Lauderdale line station, hired at three levels. Tests, troubleshoots, repairs, and replaces avionics and instrument systems, may act as a qualified inspector, and trains less experienced staff. Associate degree or equivalent and Repairman Certificate eligibility required.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 6 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Technical Troubleshooting
- Maintenance Documentation
- Training
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Avionics Technician
Vertex Aerospace · San Angelo, TX
Strong Match
C-12 avionics mechanic at Goodfellow AFB. Inspects, repairs, and installs avionics, wiring, and flight control components, troubleshoots discrepancies using manuals and schematics, and treats corrosion. Requires an FAA A&P and high school diploma.
Why this matched
Your experience maps to electrical systems, avionics, and aircraft maintenance.
Shares 6 of your 10 skills:
- Electrical Systems
- Avionics
- Aircraft Maintenance
- Safety
- Technical Manuals
- Technical Drawings
- FAA A&P certificate required
-
Avionics Engineering Support
Leidos · Bedford, MA
Strong Match
Engineering support for airborne SATCOM and avionics integration on defense aircraft in Bedford, MA. Integrates terminals, antennas, and aircraft networks, troubleshoots problems, writes installation and test documentation, and supports ground and flight tests. Bachelor's plus four years; Secret clearance eligibility.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 6 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Technical Troubleshooting
- Training
- Technical Drawings
- Bachelor's degree required
View Job
On careers.leidos.com · Added Aug 28
-
Avionics Technician
Banyan Air Service · Fort Lauderdale, FL
Strong Match
Senior avionics technician at Banyan Air Service in Fort Lauderdale. Diagnoses and repairs communication, navigation, radar, transponder, audio, and autopilot equipment down to the component level, on the bench and in business jets, then records the work and keeps test-equipment calibration current. Needs three years of related experience plus avionics factory training; A&P is a plus.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 6 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Technical Troubleshooting
- Maintenance Documentation
- Technical Manuals
- Requires: Avionics factory certification
View Job
On banyanair.acquiretm.com · Added Sep 25
-
Avionics Technician
Duncan Aviation · St. Paul, MN
Strong Match
Avionics technician at the Duncan Aviation satellite shop in St. Paul, Minnesota. Diagnoses and fixes avionics, instruments, and their wiring on business jets, orders parts, records each repair to repair-station standards, may act as a qualified inspector, joins crews on test flights, and trains newer techs. Associate degree or equivalent; $32.40 to $46.75 an hour by level.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 6 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Maintenance Documentation
- Technical Manuals
- Training
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Technician
Empire Airlines · Spokane, WA
Good Match
Avionics technician on Empire Airlines' Spokane, Washington line crew. Repairs avionics components, helps with airframe and engine maintenance on scheduled and unscheduled checks, and assists with pushbacks, aircraft moves, and nightly washes; nights and weekends possible. High school diploma required; A&P (or ready to test) and two years of avionics experience preferred.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 5 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Aircraft Maintenance
- Safety
View Job
On recruiting.paylocity.com · Added Sep 25
-
Avionics Technician
Lockheed Martin · Valparaiso, FL
Good Match
Avionics and electrical technician on F-35 depot modification work at Eglin AFB. Overhauls and repairs aircraft wiring and electrical systems, traces faults with advanced test equipment, installs engineering changes, and works from drawings and manuals. Needs 3-5 years of fighter experience with a military rating or FAA A&P; Secret clearance.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 6 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Aircraft Maintenance
- Technical Manuals
- Technical Drawings
View Job
On lockheedmartin.eightfold.ai · Added Aug 25
-
Electromechanical Overhaul Technician
Duncan Aviation · Lincoln, NE
Good Match
Electromechanical overhaul technician in Duncan Aviation's Lincoln, Nebraska component shop. Tests, troubleshoots, repairs, and overhauls aircraft accessory components to manufacturer specs, orders the parts each job needs, keeps work orders and FAA-required records current, and supplies repair details for estimates. Hired at levels I to III by experience; associate degree preferred.
Why this matched
Your experience maps to electrical systems, aircraft maintenance, and technical troubleshooting.
Shares 5 of your 10 skills:
- Electrical Systems
- Aircraft Maintenance
- Technical Troubleshooting
- Maintenance Documentation
- Technical Manuals
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Technician
Duncan Aviation · Las Vegas, NV
Good Match
Avionics technician at the Duncan Aviation satellite location in Las Vegas, Nevada. Finds and repairs faults in business-jet avionics, instruments, and wiring, orders parts, documents removals and installations to approved data, can inspect work as a qualified inspector, rides along on test flights, and takes on-call and travel rotations. Associate degree or equivalent required.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 5 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Maintenance Documentation
- Technical Manuals
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Aircraft Maintenance Technician
Empire Airlines · Great Falls, MT
Good Match
Line A&P mechanic for Empire Airlines at its Great Falls, Montana station. Inspects and repairs airframes, engines, and hydraulic, electrical, and structural systems, troubleshoots pilot write-ups, changes engines, and logs all work to FAA and program standards, with up to 25% field travel. Requires an A&P certificate and high school diploma.
Why this matched
Your experience maps to electrical systems, aircraft maintenance, and safety.
Shares 6 of your 10 skills:
- Electrical Systems
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- Technical Drawings
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Sep 25
-
Aircraft Electrician
Tyonek Global Services · Robins AFB, GA
Good Match
Aircraft electrician at Robins AFB supporting C-5, C-17, C-130, F-15, and other workloads. Troubleshoots, calibrates, and repairs power distribution, lighting, and fuel indicating systems, and tests circuits with automated equipment and schematics. Needs two years of recent experience and a Secret clearance within nine months.
Why this matched
Your experience maps to electrical systems, electronics, and technical troubleshooting.
Shares 5 of your 10 skills:
- Electrical Systems
- Electronics
- Technical Troubleshooting
- Technical Manuals
- Technical Drawings
View Job
On tyonekjobs.applicantpro.com · Added Aug 28
-
Electronics Technician
Triumph Group · West Hartford, CT
Potential Match
Lead electronics technician and FAA repairman at Triumph's West Hartford, Connecticut repair station. Inspects electronic parts to IPC-A-610, directs and trains repair staff, schedules work, updates repair procedures, writes estimates, oversees NDT, and returns parts to service. Needs five years as an aerospace technician and an A&P or repairman certificate. Pay $36.94 to $52.15 an hour.
Why this matched
Your experience maps to electronics, avionics, and maintenance documentation.
Shares 5 of your 10 skills:
- Electronics
- Avionics
- Maintenance Documentation
- Training
- Technical Drawings
- Requires: FAA A&P or Repairman certificate
View Job
On careers.triumphgroup.com · Added Sep 25
-
GSE and Facilities Support Technician
Cutter Aviation · Phoenix, AZ
Potential Match
Ground equipment and facilities technician at the Cutter Aviation Phoenix FBO. Services and repairs tugs, power units, fuel trucks, and other line equipment, inspects buildings, lighting, gates, and pavement, keeps maintenance records, handles hazardous waste and OSHA compliance, schedules contractors, and backs up fueling and towing. Needs two years of heavy mechanical work and a driver license.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 5 of your 10 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Training
View Job
On cutteraviation.com · Added Sep 29
-
Facilities Maintenance Technician
C&L Aviation Group · Bangor, ME
Potential Match
Facilities maintenance technician at the C&L Aviation hangar complex in Bangor, Maine. Keeps buildings, grounds, generators, and diesel vehicles and equipment running, diagnosing engines, pumps, motors, and hydraulics from manuals and wiring diagrams, handling light plumbing, electrical, carpentry, and HVAC work, answering urgent repair calls, and logging work orders. Pays $22 to $28 an hour.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 5 of your 10 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Technical Manuals
View Job
On careers.cla.aero · Added Sep 29
-
Structures Technician
Empire Airlines · Hayden, ID
Potential Match
Structural repair technician at Empire Airlines' MRO hangar in Hayden, Idaho. Repairs airline aircraft structures and components per work cards and the approved maintenance program, and keeps records accurate. Requires an FAA Airframe certificate and two years of commercial or military heavy-check structures experience; up to 25% travel. Starting total pay is $31.67 to $36.70 an hour.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- Requires: FAA Airframe certificate
View Job
On recruiting.paylocity.com · Added Sep 25
-
Egress Systems Technician
Vertex Aerospace · Meridian, MS
Potential Match
T-45 egress and life support technician at NAS Meridian. Removes, inspects, and reinstalls ejection seats and canopy explosives, maintains oxygen and environmental systems, and supports flight line operations. Requires three years of ejection seat maintenance and a military or factory seat course.
Why this matched
Your experience maps to aircraft maintenance, technical troubleshooting, and safety.
Shares 5 of your 10 skills:
- Aircraft Maintenance
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Technical Manuals
-
Aircraft Maintenance Technician
Cutter Aviation · Broomfield, CO
Potential Match
Airframe and powerplant technician at Cutter Aviation's Rocky Mountain Metropolitan Airport shop working on Pilatus PC-12 and PC-24 aircraft. Handles scheduled maintenance, major inspections, troubleshooting, component changes, engine runs, and modifications under Part 145 repair station procedures. Requires an A&P certificate and two years of business aircraft maintenance experience.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 5 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- Technical Drawings
- FAA A&P certificate required
View Job
On cutteraviation.com · Added Sep 25
-
CNC Maintenance Technician
Primus Aerospace · Lakewood, CO
Potential Match
CNC maintenance technician at Primus Aerospace's Lakewood, Colorado machining plant. Keeps lathes, mills, and grinders running with preventive maintenance and repairs of mechanical, electrical, hydraulic, and pneumatic faults, installs and calibrates machines, manages spare parts, and trains operators. Needs one to five years of CNC maintenance, 480V, VFD, and PLC experience, and U.S. citizenship.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 5 of your 10 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Technical Manuals
- Training
View Job
On primusaero.bamboohr.com · Added Sep 25
-
Electronic Test Technician
Lockheed Martin · Moorestown, NJ
Potential Match
Production electronic test technician setting up test equipment and automated test systems, testing first-piece and production hardware from test methods, schematics, and specification drawings, isolating faults, and keeping test records.
Why this matched
Your experience maps to electronics, technical troubleshooting, and technical manuals.
Shares 4 of your 10 skills:
- Electronics
- Technical Troubleshooting
- Technical Manuals
- Technical Drawings
- Requires: Electronic technology certificate or degree
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
Composites Technician
Empire Airlines · Hayden, ID
Potential Match
Composites technician at Empire Airlines' Hayden, Idaho repair station. Repairs composite aircraft parts and components following the repair station manual, manufacturer data, and FAA rules, tags and controls removed parts, and documents all work and training. Qualification is shown through experience, training, or practical tests; A&P certificates earn pay adders.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
View Job
On recruiting.paylocity.com · Added Sep 25
-
Aircraft Maintenance Technician
Cutter Aviation · Addison, TX
Potential Match
Aircraft maintenance technician at Cutter Aviation in Addison, Texas, working on HondaJet, Pilatus, TBM, Citation, Learjet, and other business aircraft. Performs routine maintenance and major inspections, troubleshoots and repairs systems and engines, swaps components, and runs engine and operational checks under FAA rules. Needs five years of aircraft maintenance and Part 135/145 knowledge; A&P preferred.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
View Job
On cutteraviation.com · Added Sep 29
-
Circuit Card Repair Technician
Innovative Solutions & Support · Exton, PA
Potential Match
Circuit card repair technician at Innovative Aerosystems, the avionics maker formerly known as IS&S, in Exton, Pennsylvania. Finds faults on printed circuit boards with oscilloscopes, meters, and logic analyzers, replaces chips and other parts, solders surface-mount and through-hole components, reworks boards to engineering specs, runs functional tests, and logs repairs and recurring failures. Electronics degree, technical certificate, or military training.
Why this matched
Your experience maps to electronics, avionics, and technical troubleshooting.
Shares 4 of your 10 skills:
- Electronics
- Avionics
- Technical Troubleshooting
- Technical Drawings
View Job
On recruiting.paylocity.com · Added Sep 29
-
Maintenance Supervisor
Essex Industries · St. Louis, MO
Potential Match
Maintenance supervisor for three Essex Industries plants in St. Louis. Leads technicians maintaining production equipment, boilers, HVAC, and buildings, shifts the team toward preventive maintenance, tracks downtime and backlog, keeps equipment records and PM schedules, orders parts, runs the safety committee and investigates accidents. Needs technical college and two to five years of industrial maintenance; CFC certification for HVAC work.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 5 of your 10 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Training
- Requires: EPA CFC refrigerant certification (for HVAC work)
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Quality Control Inspector
Cutter Aviation · Addison, TX
Potential Match
Quality control inspector supporting the Chief Inspector at Cutter Aviation's Addison, TX repair station. Inspects completed repairs and discrepancy write-ups, checks paperwork and sign-offs, performs aircraft inspections, researches logbooks, and helps return aircraft to service. Requires an FAA A&P certificate, a high school diploma or GED, and solid knowledge of FAA repair station rules.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- FAA A&P certificate required
View Job
On cutteraviation.com · Added Sep 25
-
Sheet Metal Technician
Cutter Aviation · Phoenix, AZ
Potential Match
Sheet metal and structures technician in Cutter Aviation's Phoenix Sky Harbor maintenance hangar. Repairs airframe structure on customer aircraft: riveting, patches, fiberglass work, corrosion treatment, priming, and paint, plus installing added equipment and logging each repair to FAA standards. Three to five years of aircraft structural repair experience preferred; high school diploma or GED required.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
View Job
On cutteraviation.com · Added Sep 25
-
Aircraft Maintenance Technician
Banyan Air Service · Fort Lauderdale, FL
Potential Match
A&P mechanic at Banyan Air Service's Fort Lauderdale Part 145 repair station, maintaining turbine business aircraft from King Airs to Gulfstreams. Performs inspections and repairs on airframes, engines, and components, looks up tasks and parts in manufacturer manuals, tags removed parts, and supports AOG travel. Requires an A&P, five years of hands-on experience on business jets, and personal tools.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- FAA A&P certificate required
View Job
On banyanair.acquiretm.com · Added Sep 25
-
Aircraft Inspector
C&L Aviation Group · Bangor, ME
Potential Match
Required-inspection-item (RII) inspector on a shift at C&L Aviation's Bangor, Maine repair station. Reviews work order packages, reads drawings, manuals, and test procedures, and confirms inspections meet repair station, FAA, and customer requirements using precision measuring tools. Needs an A&P and about five to seven years of aviation experience; prior inspection or military experience is a plus.
Why this matched
Your experience maps to safety, maintenance documentation, and technical manuals.
Shares 4 of your 10 skills:
- Safety
- Maintenance Documentation
- Technical Manuals
- Technical Drawings
- FAA A&P certificate required
View Job
On careers.cla.aero · Added Sep 25
-
Electronics Test Technician
Innovative Solutions & Support · Exton, PA
Potential Match
Day-shift electronics test technician at Innovative Aerosystems' Part 145 repair station in Exton, Pennsylvania. Calibrates, tests, and repairs avionics displays and instruments down to the component level, runs acceptance tests, and works with engineers on hard faults using scopes and meters. Needs an electronics associate degree or equivalent, five years of electronics repair, and SMT and through-hole soldering skills.
Why this matched
Your experience maps to electrical systems, electronics, and avionics.
Shares 4 of your 10 skills:
- Electrical Systems
- Electronics
- Avionics
- Technical Troubleshooting
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Sep 25
-
Aircraft Maintenance Technician
Airshare · Wichita, KS
Potential Match
A&P mechanic for the Airshare private jet fleet at Colonel James Jabara Airport in Wichita. Handles scheduled maintenance, repairs worn or damaged components, performs pre- and post-flight checks, reports discrepancies, and completes return-to-service records under FAA rules and the company maintenance manual. Requires an A&P and high school diploma; five years of general aviation maintenance preferred.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- FAA A&P certificate required
View Job
On paycomonline.net · Added Sep 25
-
Maintenance Technician
LMI Aerospace · Fredonia, KS
Potential Match
Maintenance technician at Sonaca North America (formerly LMI Aerospace) in Fredonia, Kansas. Installs, repairs, and maintains production machinery, forklifts, and power tools, handles plant electrical, plumbing, and HVAC work, performs routine inspections and preventive maintenance, and documents repairs. High school diploma preferred (otherwise an assessment); HVAC, journeyman electrician, or boiler licenses and National Electrical Code knowledge are pluses.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 4 of your 10 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Technical Manuals
View Job
On sonaca.wd103.myworkdayjobs.com · Added Sep 25
-
A&P Mechanic (Traveler)
Empire Airlines · Hayden, ID
Potential Match
Traveling A&P mechanic for Empire Airlines, a cargo feeder and charter operator based in Hayden, Idaho. Keeps company aircraft airworthy at outstations, works each task on the job cards to the maintenance manual and FAA rules, and completes maintenance records. Frequent travel and long stretches away; two years on type preferred; $36.67 to $41.70 an hour including adders.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Oct 1
-
A&P Mechanic
Empire Airlines · Anchorage, AK
Potential Match
A&P mechanic for Empire Airlines in Anchorage, Alaska. Keeps the company's cargo feeder aircraft airworthy, works each job card to manufacturer manuals and the approved maintenance program, and keeps maintenance records accurate and on time. Up to 25 percent travel; two years on type preferred; $45.67 to $50.70 an hour including a regional adder and certificate pay.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Oct 1
-
Technical Representative
Hartzell Engine Technologies · Montgomery, AL
Potential Match
Technical representative at Hartzell Engine Technologies in Montgomery, Alabama, supporting its alternators, heaters, turbochargers, and other general aviation engine accessories. Diagnoses and solves customer problems on piston and turbine aircraft, coaches customers and newer reps, supports installations and product launches, works issues with engineering and quality, and documents each case. Two to four years of field support; A&P required.
Why this matched
Your experience maps to electrical systems, aircraft maintenance, and technical troubleshooting.
Shares 4 of your 10 skills:
- Electrical Systems
- Aircraft Maintenance
- Technical Troubleshooting
- Training
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Oct 1
-
Maintenance Technician
NMG Aerospace · Tempe, AZ
Potential Match
Maintenance technician at NMG Aerospace in Tempe, Arizona, keeping CNC machining centers and plant equipment running. Finds and fixes electrical, mechanical, hydraulic, and pneumatic faults, rebuilds and aligns specialized machinery, carries out preventive maintenance and logs repairs, sources replacement parts, and helps with installations and facility projects. Three to five years repairing CNC or industrial equipment.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 4 of your 10 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Technical Drawings
View Job
On recruiting.ultipro.com · Added Oct 1
-
Aircraft Maintenance Technician
Cutter Aviation · San Antonio, TX
Potential Match
Aircraft maintenance technician at the Cutter Aviation repair station in San Antonio, Texas, working on business aircraft such as HondaJets, Pilatus, Citations, and Learjets. Performs scheduled maintenance and major inspections, troubleshoots and repairs airframe systems and engines, swaps components, runs leak checks and engine runs, and documents each discrepancy to repair-station rules. Five years of experience; A&P preferred.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Technical Manuals
View Job
On cutteraviation.com · Added Oct 1
-
Sheet Metal Specialist
Duncan Aviation · Provo, UT
Potential Match
Sheet metal specialist at Duncan Aviation in Provo. Repairs and alters metal and composite structures, fabricates and installs parts and antenna doublers per FAA-approved data, and handles corrosion control and interior removal. High school diploma required; structures experience preferred.
Why this matched
Your experience maps to aircraft maintenance, maintenance documentation, and technical manuals.
Shares 4 of your 10 skills:
- Aircraft Maintenance
- Maintenance Documentation
- Technical Manuals
- Technical Drawings
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Industrial Maintenance Technician
Héroux-Devtek · Springfield, OH
Potential Match
Industrial maintenance technician at Héroux-Devtek's landing gear plant in Springfield, Ohio. Installs, repairs, and services CNC lathes, mill-turns, and multi-axis mills, fixing mechanical, electrical, hydraulic, and pneumatic faults during breakdowns and scheduled downtime, plus preventive and facility maintenance. Needs four years of manufacturing experience, a high school diploma, and a craft apprenticeship or equivalent.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and safety.
Shares 4 of your 10 skills:
- Electrical Systems
- Technical Troubleshooting
- Safety
- Technical Manuals
View Job
On recruiting.ultipro.ca · Added Sep 25
-
Assembly and Test Technician
Triumph Group · Clemmons, NC
Potential Match
Hydraulic assembly and test technician at Triumph's actuation systems plant in Clemmons, North Carolina. Builds, acceptance-tests, troubleshoots, repairs, and finishes hydraulic components from engineering drawings and specs, records assembly and test data, and trains others on precision measuring tools. Needs a high school diploma and two years of military, aviation maintenance, or manufacturing experience; A&P preferred.
Why this matched
Your experience maps to technical troubleshooting, maintenance documentation, and training.
Shares 4 of your 10 skills:
- Technical Troubleshooting
- Maintenance Documentation
- Training
- Technical Drawings
View Job
On careers.triumphgroup.com · Added Sep 25
-
CNC Mill Production Team Lead
Primus Aerospace · Lakewood, CO
Potential Match
CNC mill team lead at Primus Aerospace in Lakewood, Colorado, which machines tight-tolerance parts for defense and aerospace primes. Runs daily mill production, sets up 3- to 5-axis mills, proves and troubleshoots programs, tracks scrap and cycle times, trains and evaluates machinists, and leads lean and 5S work. Needs five years of machining and GD&T. Pays $30 to $42 hourly.
Why this matched
Your experience maps to technical troubleshooting, safety, and training.
Shares 4 of your 10 skills:
- Technical Troubleshooting
- Safety
- Training
- Technical Drawings
View Job
On primusaero.bamboohr.com · Added Sep 29