About the 2A953 specialty
Performs maintenance, inspection, and repair of electronic warfare and radar surveillance systems on bomber and special mission aircraft, including radar warning receivers, jammers, countermeasures dispensers, and surveillance radar. Operates automatic and manual test equipment to isolate faults, removes and replaces line replaceable units, performs operational checks, alignment, and calibration, and documents all maintenance actions. Journeyman (5-skill) level.
Transferable skills
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
- Maintenance Documentation
- Technical Manuals
Filter these jobs by location, pay, and more
17 jobs match 2A953 Bomber/Special Electronic Warfare and Radar Surveillance Integrated Avionics Journeyman
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Avionics Technician
Banyan Air Service · Fort Lauderdale, FL
Strong Match
Senior avionics technician at Banyan Air Service in Fort Lauderdale. Diagnoses and repairs communication, navigation, radar, transponder, audio, and autopilot equipment down to the component level, on the bench and in business jets, then records the work and keeps test-equipment calibration current. Needs three years of related experience plus avionics factory training; A&P is a plus.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 8 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
- Maintenance Documentation
- Technical Manuals
- Requires: Avionics factory certification
View Job
On banyanair.acquiretm.com · Added Sep 25
-
Electronics Test Technician
Innovative Solutions & Support · Exton, PA
Strong Match
Day-shift electronics test technician at Innovative Aerosystems' Part 145 repair station in Exton, Pennsylvania. Calibrates, tests, and repairs avionics displays and instruments down to the component level, runs acceptance tests, and works with engineers on hard faults using scopes and meters. Needs an electronics associate degree or equivalent, five years of electronics repair, and SMT and through-hole soldering skills.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 6 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Sep 25
-
Avionics Technician
Duncan Aviation · Las Vegas, NV
Strong Match
Avionics technician at the Duncan Aviation satellite location in Las Vegas, Nevada. Finds and repairs faults in business-jet avionics, instruments, and wiring, orders parts, documents removals and installations to approved data, can inspect work as a qualified inspector, rides along on test flights, and takes on-call and travel rotations. Associate degree or equivalent required.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 6 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Maintenance Documentation
- Technical Manuals
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Technician
Duncan Aviation · Fort Lauderdale, FL
Strong Match
Avionics technician at Duncan Aviation's Fort Lauderdale line station, hired at three levels. Tests, troubleshoots, repairs, and replaces avionics and instrument systems, may act as a qualified inspector, and trains less experienced staff. Associate degree or equivalent and Repairman Certificate eligibility required.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 6 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Maintenance Documentation
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Aircraft Electrician
Tyonek Global Services · Robins AFB, GA
Strong Match
Aircraft electrician at Robins AFB supporting C-5, C-17, C-130, F-15, and other workloads. Troubleshoots, calibrates, and repairs power distribution, lighting, and fuel indicating systems, and tests circuits with automated equipment and schematics. Needs two years of recent experience and a Secret clearance within nine months.
Why this matched
Your experience maps to electronics, electrical systems, and testing.
Shares 6 of your 8 skills:
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
- Technical Manuals
View Job
On tyonekjobs.applicantpro.com · Added Aug 28
-
Avionics Technician
Duncan Aviation · St. Paul, MN
Strong Match
Avionics technician at the Duncan Aviation satellite shop in St. Paul, Minnesota. Diagnoses and fixes avionics, instruments, and their wiring on business jets, orders parts, records each repair to repair-station standards, may act as a qualified inspector, joins crews on test flights, and trains newer techs. Associate degree or equivalent; $32.40 to $46.75 an hour by level.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 6 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Maintenance Documentation
- Technical Manuals
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Technician
Cutter Aviation · Broomfield, CO
Strong Match
Avionics technician in Cutter Aviation's Broomfield, CO repair station. Installs, repairs, troubleshoots, and modifies avionics and airframe electrical systems on business aircraft, performs operational checks, and documents every discrepancy to Part 145 standards. Needs two or more years of avionics installation and repair experience; A&P preferred, FCC license optional, high school diploma required.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 6 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Maintenance Documentation
- Technical Manuals
View Job
On cutteraviation.com · Added Sep 25
-
Electronics Test Technician (3rd Shift)
Innovative Solutions & Support · Exton, PA
Strong Match
Third-shift electronics test technician at Innovative Aerosystems, the avionics maker in Exton, Pennsylvania. Calibrates, tests, and repairs customer avionics and instrument assemblies to the component level under FAA Part 145 repair station rules, runs acceptance tests, troubleshoots video, Ethernet, and display circuits, solders surface-mount parts, and documents results. Associate degree or equivalent plus five years.
Why this matched
Your experience maps to avionics, electronics, and testing.
Shares 5 of your 8 skills:
- Avionics
- Electronics
- Testing
- Technical Troubleshooting
- Calibration
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Oct 1
-
Electromechanical Overhaul Technician
Duncan Aviation · Lincoln, NE
Good Match
Electromechanical overhaul technician in Duncan Aviation's Lincoln, Nebraska component shop. Tests, troubleshoots, repairs, and overhauls aircraft accessory components to manufacturer specs, orders the parts each job needs, keeps work orders and FAA-required records current, and supplies repair details for estimates. Hired at levels I to III by experience; associate degree preferred.
Why this matched
Your experience maps to electrical systems, testing, and technical troubleshooting.
Shares 5 of your 8 skills:
- Electrical Systems
- Testing
- Technical Troubleshooting
- Maintenance Documentation
- Technical Manuals
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Engineering Support
Leidos · Bedford, MA
Good Match
Engineering support for airborne SATCOM and avionics integration on defense aircraft in Bedford, MA. Integrates terminals, antennas, and aircraft networks, troubleshoots problems, writes installation and test documentation, and supports ground and flight tests. Bachelor's plus four years; Secret clearance eligibility.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 5 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Bachelor's degree required
View Job
On careers.leidos.com · Added Aug 28
-
Avionics Technician
Lockheed Martin · Valparaiso, FL
Good Match
Avionics and electrical technician on F-35 depot modification work at Eglin AFB. Overhauls and repairs aircraft wiring and electrical systems, traces faults with advanced test equipment, installs engineering changes, and works from drawings and manuals. Needs 3-5 years of fighter experience with a military rating or FAA A&P; Secret clearance.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 5 of your 8 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Manuals
View Job
On lockheedmartin.eightfold.ai · Added Aug 25
-
Electronic Test Technician
Lockheed Martin · Moorestown, NJ
Good Match
Production electronic test technician setting up test equipment and automated test systems, testing first-piece and production hardware from test methods, schematics, and specification drawings, isolating faults, and keeping test records.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 4 of your 8 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Technical Manuals
- Requires: Electronic technology certificate or degree
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
Circuit Card Repair Technician
Innovative Solutions & Support · Exton, PA
Good Match
Circuit card repair technician at Innovative Aerosystems, the avionics maker formerly known as IS&S, in Exton, Pennsylvania. Finds faults on printed circuit boards with oscilloscopes, meters, and logic analyzers, replaces chips and other parts, solders surface-mount and through-hole components, reworks boards to engineering specs, runs functional tests, and logs repairs and recurring failures. Electronics degree, technical certificate, or military training.
Why this matched
Your experience maps to avionics, electronics, and testing.
Shares 4 of your 8 skills:
- Avionics
- Electronics
- Testing
- Technical Troubleshooting
View Job
On recruiting.paylocity.com · Added Sep 29
-
NDT Technician
C&L Aviation Group · Bangor, ME
Potential Match
Nondestructive testing technician at C&L Aviation's Bangor, Maine MRO. Inspects aircraft and parts for cracks and flaws with eddy current, magnetic particle, ultrasonic, and penetrant methods, prepares parts, calibrates and maintains NDT equipment, and completes inspection records. Requires ASNT Level II in those methods, five years of NDT work, and an A&P; NAS 410 and radiography preferred.
Why this matched
Your experience maps to testing, calibration, and maintenance documentation.
Shares 4 of your 8 skills:
- Testing
- Calibration
- Maintenance Documentation
- Technical Manuals
- FAA A&P certificate required
- Requires: ASNT NDT Level II (ET, MT, UT, PT)
View Job
On careers.cla.aero · Added Sep 25
-
Electronic Calibration Technician
Moog · Torrance, CA
Potential Match
Electronic calibration technician in the metrology lab of Moog's Military Aircraft Group in Torrance, California, which builds flight control actuators for aircraft such as the F-35. Calibrates and repairs electronic, hydraulic, and servo test stands and measuring equipment from procedures and military specs, and isolates faults to the component. Five years of calibration; $30 to $45 an hour.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 4 of your 8 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Calibration
View Job
On moog.wd5.myworkdayjobs.com · Added Oct 1
-
Facilities Maintenance Technician
C&L Aviation Group · Bangor, ME
Potential Match
Facilities maintenance technician at the C&L Aviation hangar complex in Bangor, Maine. Keeps buildings, grounds, generators, and diesel vehicles and equipment running, diagnosing engines, pumps, motors, and hydraulics from manuals and wiring diagrams, handling light plumbing, electrical, carpentry, and HVAC work, answering urgent repair calls, and logging work orders. Pays $22 to $28 an hour.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and maintenance documentation.
Shares 4 of your 8 skills:
- Electrical Systems
- Technical Troubleshooting
- Maintenance Documentation
- Technical Manuals
View Job
On careers.cla.aero · Added Sep 29
-
CNC Maintenance Technician
Primus Aerospace · Lakewood, CO
Potential Match
CNC maintenance technician at Primus Aerospace's Lakewood, Colorado machining plant. Keeps lathes, mills, and grinders running with preventive maintenance and repairs of mechanical, electrical, hydraulic, and pneumatic faults, installs and calibrates machines, manages spare parts, and trains operators. Needs one to five years of CNC maintenance, 480V, VFD, and PLC experience, and U.S. citizenship.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and calibration.
Shares 4 of your 8 skills:
- Electrical Systems
- Technical Troubleshooting
- Calibration
- Technical Manuals
View Job
On primusaero.bamboohr.com · Added Sep 25