About the 2A753 specialty
Performs maintenance, repair, and modification of aircraft structures and components. Repairs and replaces sheet metal, composite, bonded, and honeycomb structures, fabricates replacement parts from drawings and templates, performs corrosion identification, treatment, and prevention, applies protective coatings and markings, inspects structures for damage and serviceability, and documents all maintenance actions. Journeyman (5-skill) level.
Transferable skills
- Aircraft Structures
- Sheet Metal
- Composite Materials
- Fabrication
- Aircraft Maintenance
- Inspection
- Technical Drawings
- Maintenance Documentation
Filter these jobs by location, pay, and more
12 jobs match 2A753 Aircraft Structural Maintenance Journeyman
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Sheet Metal Specialist
Duncan Aviation · Provo, UT
Strong Match
Sheet metal specialist at Duncan Aviation in Provo. Repairs and alters metal and composite structures, fabricates and installs parts and antenna doublers per FAA-approved data, and handles corrosion control and interior removal. High school diploma required; structures experience preferred.
Why this matched
Your experience maps to aircraft structures, sheet metal, and composite materials.
Shares 7 of your 8 skills:
- Aircraft Structures
- Sheet Metal
- Composite Materials
- Fabrication
- Aircraft Maintenance
- Technical Drawings
- Maintenance Documentation
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Sheet Metal Technician
Cutter Aviation · Phoenix, AZ
Strong Match
Sheet metal and structures technician in Cutter Aviation's Phoenix Sky Harbor maintenance hangar. Repairs airframe structure on customer aircraft: riveting, patches, fiberglass work, corrosion treatment, priming, and paint, plus installing added equipment and logging each repair to FAA standards. Three to five years of aircraft structural repair experience preferred; high school diploma or GED required.
Why this matched
Your experience maps to aircraft structures, sheet metal, and composite materials.
Shares 6 of your 8 skills:
- Aircraft Structures
- Sheet Metal
- Composite Materials
- Fabrication
- Aircraft Maintenance
- Maintenance Documentation
View Job
On cutteraviation.com · Added Sep 25
-
Composites Technician
Empire Airlines · Hayden, ID
Strong Match
Composites technician at Empire Airlines' Hayden, Idaho repair station. Repairs composite aircraft parts and components following the repair station manual, manufacturer data, and FAA rules, tags and controls removed parts, and documents all work and training. Qualification is shown through experience, training, or practical tests; A&P certificates earn pay adders.
Why this matched
Your experience maps to aircraft structures, composite materials, and fabrication.
Shares 5 of your 8 skills:
- Aircraft Structures
- Composite Materials
- Fabrication
- Aircraft Maintenance
- Maintenance Documentation
View Job
On recruiting.paylocity.com · Added Sep 25
-
Structures Technician
Empire Airlines · Hayden, ID
Good Match
Structural repair technician at Empire Airlines' MRO hangar in Hayden, Idaho. Repairs airline aircraft structures and components per work cards and the approved maintenance program, and keeps records accurate. Requires an FAA Airframe certificate and two years of commercial or military heavy-check structures experience; up to 25% travel. Starting total pay is $31.67 to $36.70 an hour.
Why this matched
Your experience maps to aircraft structures, sheet metal, and aircraft maintenance.
Shares 4 of your 8 skills:
- Aircraft Structures
- Sheet Metal
- Aircraft Maintenance
- Maintenance Documentation
- Requires: FAA Airframe certificate
View Job
On recruiting.paylocity.com · Added Sep 25
-
Sheet Metal Assembler
LMI Aerospace · Cottonwood Falls, KS
Good Match
Sheet metal assembler at Sonaca North America in Cottonwood Falls, Kansas. Reads blueprints, work orders, and engineering orders to plan the build, loads aluminum parts into fixtures, drills, reams, countersinks, and rivets, installs nutplates and studs, bonds parts, smooths and deburrs surfaces, and reworks rejected parts. Aircraft or sheet metal experience preferred; high school diploma or assessment.
Why this matched
Your experience maps to aircraft structures, sheet metal, and inspection.
Shares 4 of your 8 skills:
- Aircraft Structures
- Sheet Metal
- Inspection
- Technical Drawings
View Job
On sonaca.wd103.myworkdayjobs.com · Added Sep 29
-
TIG Welder
NMG Aerospace · Stow, OH
Good Match
TIG welder at NMG Aerospace in Stow, Ohio. Welds stainless, aluminum, and titanium pressure tanks and structural parts to print, torch-brazes joints, installs hardware, and checks welds and dimensions with gauges. Also runs shears, press brakes, and plasma cutters. Needs three to five years of TIG welding, blueprint reading, and passing company-supplied MIL-STD-1595 or AWS D17.1 testing.
Why this matched
Your experience maps to sheet metal, fabrication, and inspection.
Shares 4 of your 8 skills:
- Sheet Metal
- Fabrication
- Inspection
- Technical Drawings
- Requires: MIL-STD-1595 / AWS D17.1 weld certification (company-supplied test)
View Job
On recruiting.ultipro.com · Added Sep 29
-
Aircraft Sheet Metal Technician
Banyan Air Service · Fort Lauderdale, FL
Good Match
Sheet metal technician at the Banyan Air Service repair station in Fort Lauderdale, working on turbine aircraft from King Airs to Gulfstreams. Assesses structural damage, helps estimate labor and materials, works from blueprints, orders parts, and completes repairs to manufacturer and FAA standards. Needs five years of sheet metal work with a portfolio, an A&P license, and personal tools.
Why this matched
Your experience maps to aircraft structures, sheet metal, and aircraft maintenance.
Shares 4 of your 8 skills:
- Aircraft Structures
- Sheet Metal
- Aircraft Maintenance
- Technical Drawings
- FAA A&P certificate required
View Job
On banyanair.acquiretm.com · Added Sep 29
-
Aircraft Upholstery Technician
C&L Aviation Group · Bangor, ME
Good Match
Upholstery technician in the C&L Aviation interior shop in Bangor, Maine. Works from drawings and aircraft specs to strip, clean, repair, and re-cover panels and seats in fabric, vinyl, and leather, cuts patterns and carpets, sews covers, installs headliners and sidewalls, and signs off work orders. Needs two years of industrial upholstery. Pays $22 to $35 an hour.
Why this matched
Your experience maps to composite materials, fabrication, and technical drawings.
Shares 4 of your 8 skills:
- Composite Materials
- Fabrication
- Technical Drawings
- Maintenance Documentation
View Job
On careers.cla.aero · Added Sep 29
-
Composite Fabricator
Lockheed Martin · Fort Worth, TX
Potential Match
Composite fabricator hand-laying fiberglass and graphite prepreg into complex aircraft structures, guided by laser ply projection and digital work instructions, and preparing laminates for autoclave curing.
Why this matched
Your experience maps to aircraft structures, composite materials, and fabrication.
Shares 4 of your 8 skills:
- Aircraft Structures
- Composite Materials
- Fabrication
- Technical Drawings
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
Sheet Metal Assembler (Paint Touch-Up)
LMI Aerospace · Washington, MO
Potential Match
Sheet metal assembler and paint touch-up worker at Sonaca North America in Washington, Missouri. Reads blueprints and work orders to plan each build, loads aluminum parts into fixtures, drills, reams, countersinks, and rivets, installs studs and nutplates, bonds parts, smooths and deburrs edges, inspects work, applies touch-up paint, and reworks rejected parts. Aircraft or sheet metal experience preferred.
Why this matched
Your experience maps to aircraft structures, sheet metal, and inspection.
Shares 4 of your 8 skills:
- Aircraft Structures
- Sheet Metal
- Inspection
- Technical Drawings
View Job
On sonaca.wd103.myworkdayjobs.com · Added Oct 1
-
Forming Fabricator
LMI Aerospace · St. Charles, MO
Potential Match
Second-shift sheet metal forming fabricator at Sonaca North America (formerly LMI Aerospace) in St. Charles, Missouri, working four ten-hour nights. Sets up and runs shears, saws, and forming equipment from planning and engineering data, checks first parts with gauges, mylars, and calipers, inspects every part, does minor machine upkeep, and records counts and nonconformances. High school diploma preferred.
Why this matched
Your experience maps to sheet metal, fabrication, and inspection.
Shares 4 of your 8 skills:
- Sheet Metal
- Fabrication
- Inspection
- Technical Drawings
View Job
On sonaca.wd103.myworkdayjobs.com · Added Sep 25
-
Machine Operator
Piper Aircraft · Vero Beach, FL
Potential Match
Machine operator on Piper Aircraft's Vero Beach, Florida production floor, hired at three levels. Forms and machines aircraft parts on brake presses, shears, punch presses, laser turrets, tube benders, lathes, and mills from Piper drawings and process specs, performs first-article and self inspections, and handles routine machine upkeep under FAA quality rules.
Why this matched
Your experience maps to sheet metal, fabrication, and inspection.
Shares 4 of your 8 skills:
- Sheet Metal
- Fabrication
- Inspection
- Technical Drawings
View Job
On irecruit-us.com · Added Sep 25