About the 2A752 specialty
Performs nondestructive inspection of aircraft structures, components, and support equipment using liquid penetrant, magnetic particle, eddy current, ultrasonic, and radiographic methods. Evaluates parts for cracks, corrosion, and material defects, interprets indications against acceptance criteria, performs joint oil analysis to detect internal component wear, observes radiation and chemical safety procedures, and documents inspection findings and results. Journeyman (5-skill) level.
Transferable skills
- Inspection
- Aircraft Inspection
- Testing
- Quality Control
- Aircraft Structures
- Safety
- Root Cause Analysis
- Maintenance Documentation
Filter these jobs by location, pay, and more
22 jobs match 2A752 Nondestructive Inspection
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Structures Inspector
Piper Aircraft · Vero Beach, FL
Strong Match
Structures inspector at Piper Aircraft in Vero Beach, Florida, checking parts, assemblies, and aircraft systems against drawings and process specs during production. Measures with precision gauges, and at higher levels a FARO arm and laser tracker, reviews build records, writes up nonconforming parts for corrective action, and supports first article and FAA audits. Two years of manufacturing experience to start.
Why this matched
Your experience maps to inspection, aircraft inspection, and testing.
Shares 6 of your 8 skills:
- Inspection
- Aircraft Inspection
- Testing
- Quality Control
- Aircraft Structures
- Root Cause Analysis
View Job
On irecruit-us.com · Added Oct 1
-
Structures Inspector
Piper Aircraft · Vero Beach, FL
Strong Match
Structures inspector at Piper Aircraft in Vero Beach, Florida, level I or II. Inspects detail parts, assemblies, and aircraft systems against drawings, specs, and FAA rules, checks travelers and records, performs first-article and conformity inspections, and writes up nonconforming material. High school diploma required; level I needs some manufacturing or inspection time, level II three to five years.
Why this matched
Your experience maps to inspection, aircraft inspection, and testing.
Shares 6 of your 8 skills:
- Inspection
- Aircraft Inspection
- Testing
- Quality Control
- Aircraft Structures
- Root Cause Analysis
View Job
On irecruit-us.com · Added Sep 25
-
Quality Control Inspector
Cutter Aviation · Addison, TX
Good Match
Quality control inspector supporting the Chief Inspector at Cutter Aviation's Addison, TX repair station. Inspects completed repairs and discrepancy write-ups, checks paperwork and sign-offs, performs aircraft inspections, researches logbooks, and helps return aircraft to service. Requires an FAA A&P certificate, a high school diploma or GED, and solid knowledge of FAA repair station rules.
Why this matched
Your experience maps to inspection, aircraft inspection, and quality control.
Shares 5 of your 8 skills:
- Inspection
- Aircraft Inspection
- Quality Control
- Safety
- Maintenance Documentation
- FAA A&P certificate required
View Job
On cutteraviation.com · Added Sep 25
-
Aircraft Inspector
C&L Aviation Group · Bangor, ME
Good Match
Required-inspection-item (RII) inspector on a shift at C&L Aviation's Bangor, Maine repair station. Reviews work order packages, reads drawings, manuals, and test procedures, and confirms inspections meet repair station, FAA, and customer requirements using precision measuring tools. Needs an A&P and about five to seven years of aviation experience; prior inspection or military experience is a plus.
Why this matched
Your experience maps to inspection, aircraft inspection, and quality control.
Shares 5 of your 8 skills:
- Inspection
- Aircraft Inspection
- Quality Control
- Safety
- Maintenance Documentation
- FAA A&P certificate required
View Job
On careers.cla.aero · Added Sep 25
-
NDT Technician
C&L Aviation Group · Bangor, ME
Good Match
Nondestructive testing technician at C&L Aviation's Bangor, Maine MRO. Inspects aircraft and parts for cracks and flaws with eddy current, magnetic particle, ultrasonic, and penetrant methods, prepares parts, calibrates and maintains NDT equipment, and completes inspection records. Requires ASNT Level II in those methods, five years of NDT work, and an A&P; NAS 410 and radiography preferred.
Why this matched
Your experience maps to inspection, aircraft inspection, and testing.
Shares 5 of your 8 skills:
- Inspection
- Aircraft Inspection
- Testing
- Quality Control
- Maintenance Documentation
- FAA A&P certificate required
- Requires: ASNT NDT Level II (ET, MT, UT, PT)
View Job
On careers.cla.aero · Added Sep 25
-
Oxygen Systems Technician
Airborne Systems · NJ
Good Match
Entry-level oxygen systems technician at Airborne Systems in New Jersey, maker of parachutes and aircrew oxygen equipment. Cleans and inspects parts in a clean room, measures them with calipers and optical tools against blueprints, assembles and pressure-tests hoses and subassemblies, and packages parts. High school diploma; up to three years of inspection or assembly experience. $20 to $28 an hour.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 4 of your 8 skills:
- Inspection
- Testing
- Quality Control
- Safety
View Job
On airborne-sys.com · Added Sep 25
-
Quality Control Inspector
Airborne Systems · CA
Good Match
QC inspector at Airborne Systems' California parachute plant. Inspects sewn materials and assemblies during production with calipers and force gauges, reads drawings and revision levels, records inspection and traceability data, flags quality problems, inspects customer repairs, and trains new inspectors. Needs a high school diploma, a year or two of inspection, and U.S. person status.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 4 of your 8 skills:
- Inspection
- Testing
- Quality Control
- Root Cause Analysis
View Job
On airborne-sys.com · Added Sep 25
-
Quality Engineer
Lockheed Martin · Fort Worth, TX
Potential Match
Quality engineer applying quality principles to incoming material, production, and supplier products; leads failure investigations, MRB decisions, and corrective action, designs inspection and test processes, and performs statistical analysis of nonconforming product.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 4 of your 8 skills:
- Inspection
- Testing
- Quality Control
- Root Cause Analysis
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
NDT Technician
Triumph Group · Park City, UT
Potential Match
NDT technician at Triumph Geared Solutions in Park City, Utah. Inspects aerospace parts by penetrant and magnetic particle methods to FAA, Nadcap, and customer specs, interprets results against drawings, maintains processing equipment and process controls, and keeps inspection records. Requires a high school diploma, Level II in MT, PT, and digital radiography, and U.S. citizenship or residency.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 4 of your 8 skills:
- Inspection
- Testing
- Quality Control
- Root Cause Analysis
- Requires: NDT Level II (MT, PT, non-film RT)
View Job
On careers.triumphgroup.com · Added Sep 25
-
CMM Programmer
Piper Aircraft · Vero Beach, FL
Potential Match
CMM programmer at Piper Aircraft in Vero Beach, Florida, hired at regular or senior level. Writes, proves, and tunes coordinate measuring machine programs in PC-DMIS or similar, sets fixtures and probes, reads drawings and GD&T to set inspection criteria, runs AS9102 first article inspections, and joins material review work. Two years of CMM inspection for regular, five for senior.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 4 of your 8 skills:
- Inspection
- Testing
- Quality Control
- Root Cause Analysis
View Job
On irecruit-us.com · Added Oct 1
-
Quality Assurance Technician
Moog · Buffalo, NY
Potential Match
Quality assurance technician with Moog Defense Group near Buffalo, New York. Carries out inspection plans for receiving, machining, assembly, and test, checks parts with microscopes, precision gauges, and CMMs, runs gauge and process capability studies and SPC, supports first article and source inspections, and helps investigate nonconformances. Three years in manufacturing quality; $28 to $37 an hour.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 4 of your 8 skills:
- Inspection
- Testing
- Quality Control
- Root Cause Analysis
View Job
On moog.wd5.myworkdayjobs.com · Added Oct 1
-
Assembly Inspector
Lockheed Martin · Fort Worth, TX
Potential Match
Production-line inspector at Lockheed Martin Fort Worth checking finished aircraft systems (electrical, hydraulic, engine, flight controls, structures) during final acceptance. Accepts or rejects work against specifications and drawings and clears material review items. Must pass an inspector assessment; military maintenance experience is valued.
Why this matched
Your experience maps to inspection, aircraft inspection, and testing.
Shares 5 of your 8 skills:
- Inspection
- Aircraft Inspection
- Testing
- Quality Control
- Aircraft Structures
View Job
On lockheedmartin.eightfold.ai · Added Aug 25
-
Airframe Technician
Duncan Aviation · Battle Creek, MI
Potential Match
Airframe technician on Learjet business jets at Duncan Aviation in Battle Creek, hiring from entry level up. Inspects, services, troubleshoots, and repairs aircraft systems and documents work in the company work order system. Requires an FAA Airframe certificate; Powerplant preferred.
Why this matched
Your experience maps to aircraft inspection, testing, and aircraft structures.
Shares 4 of your 8 skills:
- Aircraft Inspection
- Testing
- Aircraft Structures
- Maintenance Documentation
- FAA A&P certificate required
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Precision Assembler
Essex Industries · Milford, CT
Potential Match
Precision assembler at Essex Industries in Milford, Connecticut. Builds complex aerospace components from blueprints, work instructions, and acceptance test procedures, sets up fixtures and test gear, runs mechanical tests and records data, diagnoses faults and repairs units under FAA and quality rules, and inspects supplier parts. Needs three to five years of mechanical assembly or technician work; vocational training preferred.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 4 of your 8 skills:
- Inspection
- Testing
- Quality Control
- Root Cause Analysis
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Quality Tester
Essex Industries · St. Louis, MO
Potential Match
Entry-level quality tester at Essex Industries in St. Louis, Missouri. Tests lithium products and components on the assembly line and in the lab, sets up and watches test equipment by procedure, records results and trend data, separates good parts from defective ones, checks labeling and packaging, and reports major failures. High school reading and math; inspection experience a plus.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 3 of your 8 skills:
- Inspection
- Testing
- Quality Control
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Egress Systems Technician
Vertex Aerospace · Meridian, MS
Potential Match
T-45 egress and life support technician at NAS Meridian. Removes, inspects, and reinstalls ejection seats and canopy explosives, maintains oxygen and environmental systems, and supports flight line operations. Requires three years of ejection seat maintenance and a military or factory seat course.
Why this matched
Your experience maps to inspection, aircraft inspection, and safety.
Shares 4 of your 8 skills:
- Inspection
- Aircraft Inspection
- Safety
- Maintenance Documentation
-
Aircraft Maintenance Technician
Cutter Aviation · Broomfield, CO
Potential Match
Airframe and powerplant technician at Cutter Aviation's Rocky Mountain Metropolitan Airport shop working on Pilatus PC-12 and PC-24 aircraft. Handles scheduled maintenance, major inspections, troubleshooting, component changes, engine runs, and modifications under Part 145 repair station procedures. Requires an A&P certificate and two years of business aircraft maintenance experience.
Why this matched
Your experience maps to aircraft inspection, testing, and safety.
Shares 4 of your 8 skills:
- Aircraft Inspection
- Testing
- Safety
- Maintenance Documentation
- FAA A&P certificate required
View Job
On cutteraviation.com · Added Sep 25
-
Production Supervisor, Grinding
Héroux-Devtek · Livonia, MI
Potential Match
Second-shift production supervisor for the grinding department at Beaver Aerospace & Defense in Livonia, Michigan. Leads machinists doing precision ID/OD, centerless, and thread grinding, schedules the work, reads drawings and sets methods and tooling, fixes grinder problems, checks parts with gauges and CMM, and coaches staff. Needs five years each of grinding and supervision. Pays $85,000 a year.
Why this matched
Your experience maps to inspection, quality control, and safety.
Shares 4 of your 8 skills:
- Inspection
- Quality Control
- Safety
- Root Cause Analysis
View Job
On recruiting.ultipro.ca · Added Sep 29
-
Structures Technician
Empire Airlines · Hayden, ID
Potential Match
Structural repair technician at Empire Airlines' MRO hangar in Hayden, Idaho. Repairs airline aircraft structures and components per work cards and the approved maintenance program, and keeps records accurate. Requires an FAA Airframe certificate and two years of commercial or military heavy-check structures experience; up to 25% travel. Starting total pay is $31.67 to $36.70 an hour.
Why this matched
Your experience maps to aircraft structures, safety, and maintenance documentation.
Shares 3 of your 8 skills:
- Aircraft Structures
- Safety
- Maintenance Documentation
- Requires: FAA Airframe certificate
View Job
On recruiting.paylocity.com · Added Sep 25
-
Aerospace Painter
Primus Aerospace · Reisterstown, MD
Potential Match
Second-shift aerospace painter at Primus Aerospace in Reisterstown, Maryland, working Monday-Thursday evenings. Cleans, sands, and masks machined parts, mixes and sprays primers, coatings, and topcoats to specification, inspects coverage and finish, and maintains spray equipment, wearing respirators and other PPE. Entry level; industrial, automotive, or aerospace painting experience preferred. U.S. citizenship required.
Why this matched
Your experience maps to inspection, quality control, and safety.
Shares 3 of your 8 skills:
- Inspection
- Quality Control
- Safety
View Job
On primusaero.bamboohr.com · Added Sep 25
-
Powder Coater
Innovative Solutions & Support · Exton, PA
Potential Match
Powder coater at Innovative Aerosystems in Exton, Pennsylvania, finishing precision parts for avionics. Cleans, sands, and masks parts, sprays powder coatings with electrostatic guns, runs the curing ovens, inspects finishes for even coverage, and maintains booths and spray equipment under PPE rules. High school diploma; two years of powder coating or automotive or industrial finishing preferred.
Why this matched
Your experience maps to inspection, quality control, and safety.
Shares 3 of your 8 skills:
- Inspection
- Quality Control
- Safety
View Job
On recruiting.paylocity.com · Added Sep 29
-
Quality Inspector (3rd Shift)
NMG Aerospace · Stow, OH
Potential Match
Third-shift quality inspector at NMG Aerospace in Stow, Ohio, working 11 pm to 7 am Sunday through Thursday. Inspects machined aerospace parts in process and at final against prints, GD&T, and military and industry specs, runs the CMM and contour tracer, completes first article inspections and FAA 8130 paperwork, and handles discrepant material reports. Three years of machining inspection.
Why this matched
Your experience maps to inspection, testing, and quality control.
Shares 3 of your 8 skills:
- Inspection
- Testing
- Quality Control
View Job
On recruiting.ultipro.com · Added Oct 1