About the 2A674 specialty
Performs and supervises maintenance, inspection, and repair of aircraft fuel systems, including tanks, bladders, pumps, valves, lines, gauges, and aerial refueling components. Directs fuel cell entry operations and enforces confined space and hazardous material procedures, resolves complex fuel system malfunctions, performs functional and leak checks, inspects completed work for technical compliance, trains junior technicians, and manages maintenance documentation. Craftsman (7-skill) level.
Transferable skills
- Fuel Systems
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Quality Control
- Supervision
- Training
- Regulatory Compliance
- Inspection
Filter these jobs by location, pay, and more
32 jobs match 2A674 Aircraft Fuel Systems Craftsman
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Quality Control Inspector
Cutter Aviation · Addison, TX
Strong Match
Quality control inspector supporting the Chief Inspector at Cutter Aviation's Addison, TX repair station. Inspects completed repairs and discrepancy write-ups, checks paperwork and sign-offs, performs aircraft inspections, researches logbooks, and helps return aircraft to service. Requires an FAA A&P certificate, a high school diploma or GED, and solid knowledge of FAA repair station rules.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and safety.
Shares 7 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Safety
- Maintenance Documentation
- Quality Control
- Regulatory Compliance
- Inspection
- FAA A&P certificate required
View Job
On cutteraviation.com · Added Sep 25
-
GSE and Facilities Support Technician
Cutter Aviation · Phoenix, AZ
Strong Match
Ground equipment and facilities technician at the Cutter Aviation Phoenix FBO. Services and repairs tugs, power units, fuel trucks, and other line equipment, inspects buildings, lighting, gates, and pavement, keeps maintenance records, handles hazardous waste and OSHA compliance, schedules contractors, and backs up fueling and towing. Needs two years of heavy mechanical work and a driver license.
Why this matched
Your experience maps to mechanical systems, technical troubleshooting, and safety.
Shares 7 of your 12 skills:
- Mechanical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Training
- Regulatory Compliance
- Inspection
View Job
On cutteraviation.com · Added Sep 29
-
Egress Systems Technician
Vertex Aerospace · Meridian, MS
Good Match
T-45 egress and life support technician at NAS Meridian. Removes, inspects, and reinstalls ejection seats and canopy explosives, maintains oxygen and environmental systems, and supports flight line operations. Requires three years of ejection seat maintenance and a military or factory seat course.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 7 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Inspection
-
Aircraft Maintenance Technician
Banyan Air Service · Fort Lauderdale, FL
Good Match
A&P mechanic at Banyan Air Service's Fort Lauderdale Part 145 repair station, maintaining turbine business aircraft from King Airs to Gulfstreams. Performs inspections and repairs on airframes, engines, and components, looks up tasks and parts in manufacturer manuals, tags removed parts, and supports AOG travel. Requires an A&P, five years of hands-on experience on business jets, and personal tools.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Safety
- Maintenance Documentation
- Regulatory Compliance
- FAA A&P certificate required
View Job
On banyanair.acquiretm.com · Added Sep 25
-
Aircraft Inspector
C&L Aviation Group · Bangor, ME
Good Match
Required-inspection-item (RII) inspector on a shift at C&L Aviation's Bangor, Maine repair station. Reviews work order packages, reads drawings, manuals, and test procedures, and confirms inspections meet repair station, FAA, and customer requirements using precision measuring tools. Needs an A&P and about five to seven years of aviation experience; prior inspection or military experience is a plus.
Why this matched
Your experience maps to aircraft inspection, safety, and maintenance documentation.
Shares 6 of your 12 skills:
- Aircraft Inspection
- Safety
- Maintenance Documentation
- Quality Control
- Regulatory Compliance
- Inspection
- FAA A&P certificate required
View Job
On careers.cla.aero · Added Sep 25
-
Aircraft Maintenance Technician
Airshare · Wichita, KS
Good Match
A&P mechanic for the Airshare private jet fleet at Colonel James Jabara Airport in Wichita. Handles scheduled maintenance, repairs worn or damaged components, performs pre- and post-flight checks, reports discrepancies, and completes return-to-service records under FAA rules and the company maintenance manual. Requires an A&P and high school diploma; five years of general aviation maintenance preferred.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Safety
- Maintenance Documentation
- Regulatory Compliance
- FAA A&P certificate required
View Job
On paycomonline.net · Added Sep 25
-
A&P Mechanic (Traveler)
Empire Airlines · Hayden, ID
Good Match
Traveling A&P mechanic for Empire Airlines, a cargo feeder and charter operator based in Hayden, Idaho. Keeps company aircraft airworthy at outstations, works each task on the job cards to the maintenance manual and FAA rules, and completes maintenance records. Frequent travel and long stretches away; two years on type preferred; $36.67 to $41.70 an hour including adders.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Safety
- Maintenance Documentation
- Regulatory Compliance
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Oct 1
-
A&P Mechanic
Empire Airlines · Anchorage, AK
Good Match
A&P mechanic for Empire Airlines in Anchorage, Alaska. Keeps the company's cargo feeder aircraft airworthy, works each job card to manufacturer manuals and the approved maintenance program, and keeps maintenance records accurate and on time. Up to 25 percent travel; two years on type preferred; $45.67 to $50.70 an hour including a regional adder and certificate pay.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Safety
- Maintenance Documentation
- Regulatory Compliance
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Oct 1
-
Aircraft Maintenance Technician
Cutter Aviation · San Antonio, TX
Good Match
Aircraft maintenance technician at the Cutter Aviation repair station in San Antonio, Texas, working on business aircraft such as HondaJets, Pilatus, Citations, and Learjets. Performs scheduled maintenance and major inspections, troubleshoots and repairs airframe systems and engines, swaps components, runs leak checks and engine runs, and documents each discrepancy to repair-station rules. Five years of experience; A&P preferred.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Safety
- Maintenance Documentation
- Regulatory Compliance
View Job
On cutteraviation.com · Added Oct 1
-
Chief Inspector
Airshare · Shelton, CT
Good Match
Part 135 chief inspector for the Airshare managed jet operation in Shelton, Connecticut. Runs inspection, RII, and maintenance training programs, audits work packages, vendors, and aircraft, tracks ADs, tool calibration, MELs, and weight and balance, onboards managed aircraft, and files service difficulty reports. Needs an A&P and five years inspecting business jets, plus Part 135 and 145 and tracking-software experience.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and maintenance documentation.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Maintenance Documentation
- Supervision
- Training
- Regulatory Compliance
- FAA A&P certificate required
View Job
On paycomonline.net · Added Sep 25
-
Return-to-Service Inspector
Duncan Aviation · Battle Creek, MI
Good Match
Return-to-service inspector at Duncan Aviation in Battle Creek, Michigan. Owns airworthiness paperwork for assigned business-jet projects from planning to delivery: researches airworthiness directives and logbook history, performs required inspections, reviews modification data packages and conformity sign-offs, answers customer and FAA questions, and mentors inspectors. Needs five years of aviation maintenance and an A&P or repairman certificate.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and maintenance documentation.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Maintenance Documentation
- Training
- Regulatory Compliance
- Inspection
- Requires: FAA A&P or Repairman certificate; Quality Inspector; RII designation eligible
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Electronics Technician
Triumph Group · West Hartford, CT
Good Match
Lead electronics technician and FAA repairman at Triumph's West Hartford, Connecticut repair station. Inspects electronic parts to IPC-A-610, directs and trains repair staff, schedules work, updates repair procedures, writes estimates, oversees NDT, and returns parts to service. Needs five years as an aerospace technician and an A&P or repairman certificate. Pay $36.94 to $52.15 an hour.
Why this matched
Your experience maps to aircraft inspection, maintenance documentation, and supervision.
Shares 6 of your 12 skills:
- Aircraft Inspection
- Maintenance Documentation
- Supervision
- Training
- Regulatory Compliance
- Inspection
- Requires: FAA A&P or Repairman certificate
View Job
On careers.triumphgroup.com · Added Sep 25
-
Mechanical Team Lead
General Dynamics · Point Mugu, CA
Good Match
Working lead for Jet Aviation's aircraft maintenance team at Point Mugu. Plans mechanical tasks, reports test status, assigns technicians, runs engines, handles inspections and repairs, and checks records against repair station and FAA standards. Requires an FAA A&P and five years of heavy maintenance on mid-size or larger aircraft.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 7 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Maintenance Documentation
- Supervision
- Training
- Regulatory Compliance
- FAA A&P certificate required
View Job
On jobs.jetaviation.com · Added Aug 26
-
Aircraft Maintenance Technician
Cutter Aviation · Broomfield, CO
Good Match
Airframe and powerplant technician at Cutter Aviation's Rocky Mountain Metropolitan Airport shop working on Pilatus PC-12 and PC-24 aircraft. Handles scheduled maintenance, major inspections, troubleshooting, component changes, engine runs, and modifications under Part 145 repair station procedures. Requires an A&P certificate and two years of business aircraft maintenance experience.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 6 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Safety
- Maintenance Documentation
- Regulatory Compliance
- FAA A&P certificate required
View Job
On cutteraviation.com · Added Sep 25
-
Aircraft Maintenance Technician
C&L Aviation Group · Bangor, ME
Good Match
A&P mechanic at C&L Aviation Services in Bangor, Maine, doing heavy maintenance and modification work on regional and corporate aircraft. Inspects, repairs, and troubleshoots structures, mechanical systems, and electronics as part of a hangar team. Requires an FAA A&P certificate and troubleshooting experience; Challenger, ERJ, Dash 8, or Saab 340 time is a plus.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 5 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Safety
- Regulatory Compliance
- FAA A&P certificate required
View Job
On careers.cla.aero · Added Sep 25
-
Line Service Technician
Hill Aircraft · Atlanta, GA
Good Match
Entry-level ramp technician at the Hill Aircraft FBO in Atlanta. Marshals, tows, and fuels business aircraft, runs daily fuel quality checks and fuel farm records, operates tugs, forklifts, and refuelers, and provides ground power, lavatory, and baggage service. Needs two years of customer service experience and a high school diploma; aviation experience preferred.
Why this matched
Your experience maps to fuel systems, safety, and quality control.
Shares 5 of your 12 skills:
- Fuel Systems
- Safety
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On hillaircraft.isolvedhire.com · Added Sep 25
-
Aircraft Maintenance Technician
Cutter Aviation · Addison, TX
Good Match
Aircraft maintenance technician at Cutter Aviation in Addison, Texas, working on HondaJet, Pilatus, TBM, Citation, Learjet, and other business aircraft. Performs routine maintenance and major inspections, troubleshoots and repairs systems and engines, swaps components, and runs engine and operational checks under FAA rules. Needs five years of aircraft maintenance and Part 135/145 knowledge; A&P preferred.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and safety.
Shares 5 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Safety
- Maintenance Documentation
- Regulatory Compliance
View Job
On cutteraviation.com · Added Sep 29
-
Maintenance Supervisor
Essex Industries · St. Louis, MO
Potential Match
Maintenance supervisor for three Essex Industries plants in St. Louis. Leads technicians maintaining production equipment, boilers, HVAC, and buildings, shifts the team toward preventive maintenance, tracks downtime and backlog, keeps equipment records and PM schedules, orders parts, runs the safety committee and investigates accidents. Needs technical college and two to five years of industrial maintenance; CFC certification for HVAC work.
Why this matched
Your experience maps to mechanical systems, technical troubleshooting, and safety.
Shares 6 of your 12 skills:
- Mechanical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Supervision
- Training
- Requires: EPA CFC refrigerant certification (for HVAC work)
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
NDT Technician
C&L Aviation Group · Bangor, ME
Potential Match
Nondestructive testing technician at C&L Aviation's Bangor, Maine MRO. Inspects aircraft and parts for cracks and flaws with eddy current, magnetic particle, ultrasonic, and penetrant methods, prepares parts, calibrates and maintains NDT equipment, and completes inspection records. Requires ASNT Level II in those methods, five years of NDT work, and an A&P; NAS 410 and radiography preferred.
Why this matched
Your experience maps to aircraft inspection, maintenance documentation, and quality control.
Shares 5 of your 12 skills:
- Aircraft Inspection
- Maintenance Documentation
- Quality Control
- Regulatory Compliance
- Inspection
- FAA A&P certificate required
- Requires: ASNT NDT Level II (ET, MT, UT, PT)
View Job
On careers.cla.aero · Added Sep 25
-
Electromechanical Overhaul Technician
Duncan Aviation · Lincoln, NE
Potential Match
Electromechanical overhaul technician in Duncan Aviation's Lincoln, Nebraska component shop. Tests, troubleshoots, repairs, and overhauls aircraft accessory components to manufacturer specs, orders the parts each job needs, keeps work orders and FAA-required records current, and supplies repair details for estimates. Hired at levels I to III by experience; associate degree preferred.
Why this matched
Your experience maps to aircraft maintenance, mechanical systems, and technical troubleshooting.
Shares 5 of your 12 skills:
- Aircraft Maintenance
- Mechanical Systems
- Technical Troubleshooting
- Maintenance Documentation
- Regulatory Compliance
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Technician
Duncan Aviation · Fort Lauderdale, FL
Potential Match
Avionics technician at Duncan Aviation's Fort Lauderdale line station, hired at three levels. Tests, troubleshoots, repairs, and replaces avionics and instrument systems, may act as a qualified inspector, and trains less experienced staff. Associate degree or equivalent and Repairman Certificate eligibility required.
Why this matched
Your experience maps to technical troubleshooting, maintenance documentation, and training.
Shares 5 of your 12 skills:
- Technical Troubleshooting
- Maintenance Documentation
- Training
- Regulatory Compliance
- Inspection
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Airframe Technician
Duncan Aviation · Battle Creek, MI
Potential Match
Airframe technician on Learjet business jets at Duncan Aviation in Battle Creek, hiring from entry level up. Inspects, services, troubleshoots, and repairs aircraft systems and documents work in the company work order system. Requires an FAA Airframe certificate; Powerplant preferred.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and mechanical systems.
Shares 5 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Mechanical Systems
- Maintenance Documentation
- Regulatory Compliance
- FAA A&P certificate required
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
CNC Mill Production Team Lead
Primus Aerospace · Lakewood, CO
Potential Match
CNC mill team lead at Primus Aerospace in Lakewood, Colorado, which machines tight-tolerance parts for defense and aerospace primes. Runs daily mill production, sets up 3- to 5-axis mills, proves and troubleshoots programs, tracks scrap and cycle times, trains and evaluates machinists, and leads lean and 5S work. Needs five years of machining and GD&T. Pays $30 to $42 hourly.
Why this matched
Your experience maps to technical troubleshooting, safety, and quality control.
Shares 5 of your 12 skills:
- Technical Troubleshooting
- Safety
- Quality Control
- Supervision
- Training
View Job
On primusaero.bamboohr.com · Added Sep 29
-
Precision Assembler
Essex Industries · Milford, CT
Potential Match
Precision assembler at Essex Industries in Milford, Connecticut. Builds complex aerospace components from blueprints, work instructions, and acceptance test procedures, sets up fixtures and test gear, runs mechanical tests and records data, diagnoses faults and repairs units under FAA and quality rules, and inspects supplier parts. Needs three to five years of mechanical assembly or technician work; vocational training preferred.
Why this matched
Your experience maps to mechanical systems, technical troubleshooting, and quality control.
Shares 5 of your 12 skills:
- Mechanical Systems
- Technical Troubleshooting
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Facilities Maintenance Technician
C&L Aviation Group · Bangor, ME
Potential Match
Facilities maintenance technician at the C&L Aviation hangar complex in Bangor, Maine. Keeps buildings, grounds, generators, and diesel vehicles and equipment running, diagnosing engines, pumps, motors, and hydraulics from manuals and wiring diagrams, handling light plumbing, electrical, carpentry, and HVAC work, answering urgent repair calls, and logging work orders. Pays $22 to $28 an hour.
Why this matched
Your experience maps to mechanical systems, technical troubleshooting, and safety.
Shares 5 of your 12 skills:
- Mechanical Systems
- Technical Troubleshooting
- Safety
- Maintenance Documentation
- Inspection
View Job
On careers.cla.aero · Added Sep 29
-
Structures Technician
Empire Airlines · Hayden, ID
Potential Match
Structural repair technician at Empire Airlines' MRO hangar in Hayden, Idaho. Repairs airline aircraft structures and components per work cards and the approved maintenance program, and keeps records accurate. Requires an FAA Airframe certificate and two years of commercial or military heavy-check structures experience; up to 25% travel. Starting total pay is $31.67 to $36.70 an hour.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 12 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Regulatory Compliance
- Requires: FAA Airframe certificate
View Job
On recruiting.paylocity.com · Added Sep 25
-
Welder
Lockheed Martin · Owego, NY
Potential Match
Production welder building aerospace parts and assemblies from aluminum, titanium, and other alloys with manual and robotic welding processes. Inspects welds, keeps traceability records, and helps train new welders to aerospace quality standards.
Why this matched
Your experience maps to safety, quality control, and training.
Shares 5 of your 12 skills:
- Safety
- Quality Control
- Training
- Regulatory Compliance
- Inspection
View Job
On lockheedmartin.eightfold.ai · Added Sep 24
-
Production Supervisor, Grinding
Héroux-Devtek · Livonia, MI
Potential Match
Second-shift production supervisor for the grinding department at Beaver Aerospace & Defense in Livonia, Michigan. Leads machinists doing precision ID/OD, centerless, and thread grinding, schedules the work, reads drawings and sets methods and tooling, fixes grinder problems, checks parts with gauges and CMM, and coaches staff. Needs five years each of grinding and supervision. Pays $85,000 a year.
Why this matched
Your experience maps to safety, quality control, and supervision.
Shares 5 of your 12 skills:
- Safety
- Quality Control
- Supervision
- Training
- Inspection
View Job
On recruiting.ultipro.ca · Added Sep 29
-
Aircraft Maintenance Technician
Empire Airlines · Great Falls, MT
Potential Match
Line A&P mechanic for Empire Airlines at its Great Falls, Montana station. Inspects and repairs airframes, engines, and hydraulic, electrical, and structural systems, troubleshoots pilot write-ups, changes engines, and logs all work to FAA and program standards, with up to 25% field travel. Requires an A&P certificate and high school diploma.
Why this matched
Your experience maps to aircraft maintenance, aircraft inspection, and safety.
Shares 5 of your 12 skills:
- Aircraft Maintenance
- Aircraft Inspection
- Safety
- Maintenance Documentation
- Regulatory Compliance
- FAA A&P certificate required
View Job
On recruiting.paylocity.com · Added Sep 25
-
Composites Technician
Empire Airlines · Hayden, ID
Potential Match
Composites technician at Empire Airlines' Hayden, Idaho repair station. Repairs composite aircraft parts and components following the repair station manual, manufacturer data, and FAA rules, tags and controls removed parts, and documents all work and training. Qualification is shown through experience, training, or practical tests; A&P certificates earn pay adders.
Why this matched
Your experience maps to aircraft maintenance, safety, and maintenance documentation.
Shares 4 of your 12 skills:
- Aircraft Maintenance
- Safety
- Maintenance Documentation
- Regulatory Compliance
View Job
On recruiting.paylocity.com · Added Sep 25
-
Quality Inspector
AeroTEC · Moses Lake, WA
Potential Match
Contract quality inspector at AeroTEC's manufacturing center in Moses Lake, Washington, supporting aircraft test programs. Runs and writes CMM programs, measures parts with hand gauges, performs first-piece and in-process checks, and completes first article packages. Needs five years of CMM inspection in aerospace or defense and U.S. person status; A&P and Part 145 experience a plus.
Why this matched
Your experience maps to safety, quality control, and regulatory compliance.
Shares 4 of your 12 skills:
- Safety
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On paycomonline.net · Added Sep 25
-
Quality Inspector II
NMG Aerospace · Tempe, AZ
Potential Match
Senior quality inspector at NMG Aerospace in Tempe, Arizona. Performs final and in-process inspection of machined aerospace parts against prints, GD&T, and military and industry specs, runs the CMM and contour tracer, completes first article inspections and FAA 8130 paperwork, handles discrepant material reports, and oversees source inspectors. Needs three years of machining inspection; ASQ certification preferred.
Why this matched
Your experience maps to quality control, supervision, and regulatory compliance.
Shares 4 of your 12 skills:
- Quality Control
- Supervision
- Regulatory Compliance
- Inspection
View Job
On recruiting.ultipro.com · Added Sep 29