About the 2A573 specialty
Performs and supervises maintenance of electronic warfare and defensive systems on mobility air forces aircraft, including radar warning receivers, missile warning systems, countermeasures dispensers, and associated antennas and wiring. Operates automatic and manual test equipment to isolate faults, removes and replaces line replaceable units, performs operational checks and calibration, inspects completed work for technical compliance, trains junior technicians, and documents all maintenance actions. Craftsman (7-skill) level.
Transferable skills
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
- Maintenance Documentation
- Quality Control
- Supervision
- Training
- Regulatory Compliance
- Inspection
Filter these jobs by location, pay, and more
29 jobs match 2A573 Mobility Air Forces Electronic Warfare Systems Craftsman
Ranked by how many of your skills each job uses. Strong matches share the most.
-
Avionics Technician
Duncan Aviation · Fort Lauderdale, FL
Strong Match
Avionics technician at Duncan Aviation's Fort Lauderdale line station, hired at three levels. Tests, troubleshoots, repairs, and replaces avionics and instrument systems, may act as a qualified inspector, and trains less experienced staff. Associate degree or equivalent and Repairman Certificate eligibility required.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 9 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Maintenance Documentation
- Training
- Regulatory Compliance
- Inspection
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Aug 27
-
Electronics Test Technician
Innovative Solutions & Support · Exton, PA
Strong Match
Day-shift electronics test technician at Innovative Aerosystems' Part 145 repair station in Exton, Pennsylvania. Calibrates, tests, and repairs avionics displays and instruments down to the component level, runs acceptance tests, and works with engineers on hard faults using scopes and meters. Needs an electronics associate degree or equivalent, five years of electronics repair, and SMT and through-hole soldering skills.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 8 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
- Quality Control
- Regulatory Compliance
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Sep 25
-
Avionics Technician
Banyan Air Service · Fort Lauderdale, FL
Strong Match
Senior avionics technician at Banyan Air Service in Fort Lauderdale. Diagnoses and repairs communication, navigation, radar, transponder, audio, and autopilot equipment down to the component level, on the bench and in business jets, then records the work and keeps test-equipment calibration current. Needs three years of related experience plus avionics factory training; A&P is a plus.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 8 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
- Maintenance Documentation
- Regulatory Compliance
- Requires: Avionics factory certification
View Job
On banyanair.acquiretm.com · Added Sep 25
-
Electronics Test Technician (3rd Shift)
Innovative Solutions & Support · Exton, PA
Strong Match
Third-shift electronics test technician at Innovative Aerosystems, the avionics maker in Exton, Pennsylvania. Calibrates, tests, and repairs customer avionics and instrument assemblies to the component level under FAA Part 145 repair station rules, runs acceptance tests, troubleshoots video, Ethernet, and display circuits, solders surface-mount parts, and documents results. Associate degree or equivalent plus five years.
Why this matched
Your experience maps to avionics, electronics, and testing.
Shares 7 of your 12 skills:
- Avionics
- Electronics
- Testing
- Technical Troubleshooting
- Calibration
- Quality Control
- Regulatory Compliance
- Associate degree or equivalent experience
View Job
On recruiting.paylocity.com · Added Oct 1
-
Avionics Engineering Support
Leidos · Bedford, MA
Strong Match
Engineering support for airborne SATCOM and avionics integration on defense aircraft in Bedford, MA. Integrates terminals, antennas, and aircraft networks, troubleshoots problems, writes installation and test documentation, and supports ground and flight tests. Bachelor's plus four years; Secret clearance eligibility.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 7 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Training
- Regulatory Compliance
- Bachelor's degree required
View Job
On careers.leidos.com · Added Aug 28
-
Electronics Technician
Triumph Group · West Hartford, CT
Strong Match
Lead electronics technician and FAA repairman at Triumph's West Hartford, Connecticut repair station. Inspects electronic parts to IPC-A-610, directs and trains repair staff, schedules work, updates repair procedures, writes estimates, oversees NDT, and returns parts to service. Needs five years as an aerospace technician and an A&P or repairman certificate. Pay $36.94 to $52.15 an hour.
Why this matched
Your experience maps to avionics, electronics, and maintenance documentation.
Shares 7 of your 12 skills:
- Avionics
- Electronics
- Maintenance Documentation
- Supervision
- Training
- Regulatory Compliance
- Inspection
- Requires: FAA A&P or Repairman certificate
View Job
On careers.triumphgroup.com · Added Sep 25
-
NDT Technician
C&L Aviation Group · Bangor, ME
Good Match
Nondestructive testing technician at C&L Aviation's Bangor, Maine MRO. Inspects aircraft and parts for cracks and flaws with eddy current, magnetic particle, ultrasonic, and penetrant methods, prepares parts, calibrates and maintains NDT equipment, and completes inspection records. Requires ASNT Level II in those methods, five years of NDT work, and an A&P; NAS 410 and radiography preferred.
Why this matched
Your experience maps to testing, calibration, and maintenance documentation.
Shares 6 of your 12 skills:
- Testing
- Calibration
- Maintenance Documentation
- Quality Control
- Regulatory Compliance
- Inspection
- FAA A&P certificate required
- Requires: ASNT NDT Level II (ET, MT, UT, PT)
View Job
On careers.cla.aero · Added Sep 25
-
Avionics Technician
Duncan Aviation · St. Paul, MN
Good Match
Avionics technician at the Duncan Aviation satellite shop in St. Paul, Minnesota. Diagnoses and fixes avionics, instruments, and their wiring on business jets, orders parts, records each repair to repair-station standards, may act as a qualified inspector, joins crews on test flights, and trains newer techs. Associate degree or equivalent; $32.40 to $46.75 an hour by level.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 6 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Maintenance Documentation
- Training
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Technician
Cutter Aviation · Broomfield, CO
Good Match
Avionics technician in Cutter Aviation's Broomfield, CO repair station. Installs, repairs, troubleshoots, and modifies avionics and airframe electrical systems on business aircraft, performs operational checks, and documents every discrepancy to Part 145 standards. Needs two or more years of avionics installation and repair experience; A&P preferred, FCC license optional, high school diploma required.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 6 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Maintenance Documentation
- Regulatory Compliance
View Job
On cutteraviation.com · Added Sep 25
-
GSE and Facilities Support Technician
Cutter Aviation · Phoenix, AZ
Good Match
Ground equipment and facilities technician at the Cutter Aviation Phoenix FBO. Services and repairs tugs, power units, fuel trucks, and other line equipment, inspects buildings, lighting, gates, and pavement, keeps maintenance records, handles hazardous waste and OSHA compliance, schedules contractors, and backs up fueling and towing. Needs two years of heavy mechanical work and a driver license.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and maintenance documentation.
Shares 6 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Maintenance Documentation
- Training
- Regulatory Compliance
- Inspection
View Job
On cutteraviation.com · Added Sep 29
-
Circuit Card Repair Technician
Innovative Solutions & Support · Exton, PA
Good Match
Circuit card repair technician at Innovative Aerosystems, the avionics maker formerly known as IS&S, in Exton, Pennsylvania. Finds faults on printed circuit boards with oscilloscopes, meters, and logic analyzers, replaces chips and other parts, solders surface-mount and through-hole components, reworks boards to engineering specs, runs functional tests, and logs repairs and recurring failures. Electronics degree, technical certificate, or military training.
Why this matched
Your experience maps to avionics, electronics, and testing.
Shares 5 of your 12 skills:
- Avionics
- Electronics
- Testing
- Technical Troubleshooting
- Quality Control
View Job
On recruiting.paylocity.com · Added Sep 29
-
Quality Inspector
Innovative Solutions & Support · Exton, PA
Potential Match
Quality inspector for Innovative Aerosystems (formerly IS&S), an avionics maker in Exton, Pennsylvania. Inspects incoming material, work in process, and finished electronic and mechanical assemblies against IPC workmanship standards, keeps calibration and quality records, and verifies documentation at final inspection. Needs five years in manufacturing, drawing-reading skills, and knowledge of AS9100 and J-STD-001; U.S. person status required.
Why this matched
Your experience maps to electronics, calibration, and quality control.
Shares 5 of your 12 skills:
- Electronics
- Calibration
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On recruiting.paylocity.com · Added Sep 25
-
Electromechanical Overhaul Technician
Duncan Aviation · Lincoln, NE
Potential Match
Electromechanical overhaul technician in Duncan Aviation's Lincoln, Nebraska component shop. Tests, troubleshoots, repairs, and overhauls aircraft accessory components to manufacturer specs, orders the parts each job needs, keeps work orders and FAA-required records current, and supplies repair details for estimates. Hired at levels I to III by experience; associate degree preferred.
Why this matched
Your experience maps to electrical systems, testing, and technical troubleshooting.
Shares 5 of your 12 skills:
- Electrical Systems
- Testing
- Technical Troubleshooting
- Maintenance Documentation
- Regulatory Compliance
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Avionics Technician
Duncan Aviation · Las Vegas, NV
Potential Match
Avionics technician at the Duncan Aviation satellite location in Las Vegas, Nevada. Finds and repairs faults in business-jet avionics, instruments, and wiring, orders parts, documents removals and installations to approved data, can inspect work as a qualified inspector, rides along on test flights, and takes on-call and travel rotations. Associate degree or equivalent required.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 5 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Maintenance Documentation
- Associate degree or equivalent experience
- Requires: FAA Repairman Certificate eligibility
View Job
On duncanaviation.workgr8.com · Added Oct 1
-
Quality Control Supervisor
Hartzell Engine Technologies · Montgomery, AL
Potential Match
Quality control supervisor at Hartzell Engine Technologies in Montgomery, Alabama, a maker of general aviation engine accessories. Leads a small team of inspectors and technicians, plans the daily inspection and test workload, keeps quality records complete, writes up nonconformances and escalates problems to production, and keeps work compliant. Three years of quality or manufacturing; bachelor's preferred.
Why this matched
Your experience maps to testing, quality control, and supervision.
Shares 5 of your 12 skills:
- Testing
- Quality Control
- Supervision
- Regulatory Compliance
- Inspection
View Job
On recruiting.paylocity.com · Added Oct 1
-
Electronic Calibration Technician
Moog · Torrance, CA
Potential Match
Electronic calibration technician in the metrology lab of Moog's Military Aircraft Group in Torrance, California, which builds flight control actuators for aircraft such as the F-35. Calibrates and repairs electronic, hydraulic, and servo test stands and measuring equipment from procedures and military specs, and isolates faults to the component. Five years of calibration; $30 to $45 an hour.
Why this matched
Your experience maps to electronics, testing, and technical troubleshooting.
Shares 5 of your 12 skills:
- Electronics
- Testing
- Technical Troubleshooting
- Calibration
- Regulatory Compliance
View Job
On moog.wd5.myworkdayjobs.com · Added Oct 1
-
Aircraft Electrician
Tyonek Global Services · Robins AFB, GA
Potential Match
Aircraft electrician at Robins AFB supporting C-5, C-17, C-130, F-15, and other workloads. Troubleshoots, calibrates, and repairs power distribution, lighting, and fuel indicating systems, and tests circuits with automated equipment and schematics. Needs two years of recent experience and a Secret clearance within nine months.
Why this matched
Your experience maps to electronics, electrical systems, and testing.
Shares 5 of your 12 skills:
- Electronics
- Electrical Systems
- Testing
- Technical Troubleshooting
- Calibration
View Job
On tyonekjobs.applicantpro.com · Added Aug 28
-
Assembly and Test Technician
Triumph Group · Clemmons, NC
Potential Match
Hydraulic assembly and test technician at Triumph's actuation systems plant in Clemmons, North Carolina. Builds, acceptance-tests, troubleshoots, repairs, and finishes hydraulic components from engineering drawings and specs, records assembly and test data, and trains others on precision measuring tools. Needs a high school diploma and two years of military, aviation maintenance, or manufacturing experience; A&P preferred.
Why this matched
Your experience maps to testing, technical troubleshooting, and maintenance documentation.
Shares 5 of your 12 skills:
- Testing
- Technical Troubleshooting
- Maintenance Documentation
- Training
- Inspection
View Job
On careers.triumphgroup.com · Added Sep 25
-
Chief Inspector
Airshare · Shelton, CT
Potential Match
Part 135 chief inspector for the Airshare managed jet operation in Shelton, Connecticut. Runs inspection, RII, and maintenance training programs, audits work packages, vendors, and aircraft, tracks ADs, tool calibration, MELs, and weight and balance, onboards managed aircraft, and files service difficulty reports. Needs an A&P and five years inspecting business jets, plus Part 135 and 145 and tracking-software experience.
Why this matched
Your experience maps to calibration, maintenance documentation, and supervision.
Shares 5 of your 12 skills:
- Calibration
- Maintenance Documentation
- Supervision
- Training
- Regulatory Compliance
- FAA A&P certificate required
View Job
On paycomonline.net · Added Sep 25
-
Precision Assembler
Essex Industries · Milford, CT
Potential Match
Precision assembler at Essex Industries in Milford, Connecticut. Builds complex aerospace components from blueprints, work instructions, and acceptance test procedures, sets up fixtures and test gear, runs mechanical tests and records data, diagnoses faults and repairs units under FAA and quality rules, and inspects supplier parts. Needs three to five years of mechanical assembly or technician work; vocational training preferred.
Why this matched
Your experience maps to testing, technical troubleshooting, and quality control.
Shares 5 of your 12 skills:
- Testing
- Technical Troubleshooting
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Avionics Manager
Cutter Aviation · Phoenix, AZ
Potential Match
Avionics manager at the Cutter Aviation Part 145 repair station in Phoenix, Arizona. Leads avionics technicians through troubleshooting, installations, upgrades, and return-to-service work, plans workloads and project timelines, keeps test equipment calibrated, orders parts, coordinates sign-offs with inspectors, and serves as technical contact for customers. Five years of avionics maintenance with lead experience; $90,000 to $130,000.
Why this matched
Your experience maps to avionics, electrical systems, and calibration.
Shares 5 of your 12 skills:
- Avionics
- Electrical Systems
- Calibration
- Supervision
- Regulatory Compliance
View Job
On cutteraviation.com · Added Oct 1
-
Structures Inspector
Piper Aircraft · Vero Beach, FL
Potential Match
Structures inspector at Piper Aircraft in Vero Beach, Florida, level I or II. Inspects detail parts, assemblies, and aircraft systems against drawings, specs, and FAA rules, checks travelers and records, performs first-article and conformity inspections, and writes up nonconforming material. High school diploma required; level I needs some manufacturing or inspection time, level II three to five years.
Why this matched
Your experience maps to testing, calibration, and quality control.
Shares 5 of your 12 skills:
- Testing
- Calibration
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On irecruit-us.com · Added Sep 25
-
Quality Inspector (3rd Shift)
NMG Aerospace · Stow, OH
Potential Match
Third-shift quality inspector at NMG Aerospace in Stow, Ohio, working 11 pm to 7 am Sunday through Thursday. Inspects machined aerospace parts in process and at final against prints, GD&T, and military and industry specs, runs the CMM and contour tracer, completes first article inspections and FAA 8130 paperwork, and handles discrepant material reports. Three years of machining inspection.
Why this matched
Your experience maps to testing, quality control, and regulatory compliance.
Shares 4 of your 12 skills:
- Testing
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On recruiting.ultipro.com · Added Oct 1
-
Avionics Technician
Lockheed Martin · Valparaiso, FL
Potential Match
Avionics and electrical technician on F-35 depot modification work at Eglin AFB. Overhauls and repairs aircraft wiring and electrical systems, traces faults with advanced test equipment, installs engineering changes, and works from drawings and manuals. Needs 3-5 years of fighter experience with a military rating or FAA A&P; Secret clearance.
Why this matched
Your experience maps to avionics, electronics, and electrical systems.
Shares 5 of your 12 skills:
- Avionics
- Electronics
- Electrical Systems
- Testing
- Regulatory Compliance
View Job
On lockheedmartin.eightfold.ai · Added Aug 25
-
Maintenance Supervisor
Essex Industries · St. Louis, MO
Potential Match
Maintenance supervisor for three Essex Industries plants in St. Louis. Leads technicians maintaining production equipment, boilers, HVAC, and buildings, shifts the team toward preventive maintenance, tracks downtime and backlog, keeps equipment records and PM schedules, orders parts, runs the safety committee and investigates accidents. Needs technical college and two to five years of industrial maintenance; CFC certification for HVAC work.
Why this matched
Your experience maps to electrical systems, technical troubleshooting, and maintenance documentation.
Shares 5 of your 12 skills:
- Electrical Systems
- Technical Troubleshooting
- Maintenance Documentation
- Supervision
- Training
- Requires: EPA CFC refrigerant certification (for HVAC work)
View Job
On essexind.rec.pro.ukg.net · Added Sep 29
-
Calibration Technician
Woodward · Fort Collins, CO
Potential Match
Instrument and calibration technician calibrating measurement instruments, troubleshooting complex instrumentation issues, developing calibration procedures, maintaining calibration records, and mentoring less experienced technicians.
Why this matched
Your experience maps to technical troubleshooting, calibration, and training.
Shares 4 of your 12 skills:
- Technical Troubleshooting
- Calibration
- Training
- Regulatory Compliance
View Job
On woodward.wd5.myworkdayjobs.com · Added Sep 24
-
Quality Control Inspector
Electroimpact · Mukilteo, WA
Potential Match
Quality control inspector at Electroimpact, a Mukilteo, Washington builder of aircraft assembly automation, on day or night shift. Measures machined parts with calipers, micrometers, height gages, and indicators against drawings, records results, and coordinates outside calibration vendors, schedules, and certificates. High school diploma required; manufacturing or inspection experience preferred, with training provided. Pay $27 to $32 an hour.
Why this matched
Your experience maps to calibration, quality control, and regulatory compliance.
Shares 4 of your 12 skills:
- Calibration
- Quality Control
- Regulatory Compliance
- Inspection
View Job
On portal.dynamicsats.com · Added Sep 25
-
Quality Control Inspector
Airborne Systems · CA
Potential Match
QC inspector at Airborne Systems' California parachute plant. Inspects sewn materials and assemblies during production with calipers and force gauges, reads drawings and revision levels, records inspection and traceability data, flags quality problems, inspects customer repairs, and trains new inspectors. Needs a high school diploma, a year or two of inspection, and U.S. person status.
Why this matched
Your experience maps to testing, quality control, and training.
Shares 4 of your 12 skills:
- Testing
- Quality Control
- Training
- Inspection
View Job
On airborne-sys.com · Added Sep 25
-
Quality Inspector II
NMG Aerospace · Tempe, AZ
Potential Match
Senior quality inspector at NMG Aerospace in Tempe, Arizona. Performs final and in-process inspection of machined aerospace parts against prints, GD&T, and military and industry specs, runs the CMM and contour tracer, completes first article inspections and FAA 8130 paperwork, handles discrepant material reports, and oversees source inspectors. Needs three years of machining inspection; ASQ certification preferred.
Why this matched
Your experience maps to quality control, supervision, and regulatory compliance.
Shares 4 of your 12 skills:
- Quality Control
- Supervision
- Regulatory Compliance
- Inspection
View Job
On recruiting.ultipro.com · Added Sep 29